Sikalastic-260 stop aqua - Liquid waterproofing membrane EC 1 PLUS - Sika

Sikalastic-260 stop aqua - Liquid waterproofing membrane EC 1 PLUS - Sika

Sikalastic-260 Stop Aqua is a single-component, water-based, ready-to-use, liquid-applied membrane for humid rooms.
Provides a fully bonded , waterproof finish, ready for tiling.
EC 1 PLUS label: very low VOC emissions .

Features

• Seamless
• Part of a complete Sika system including SealTape, primers and tile adhesives
• EC 1 PLUS label: very low VOC emissions .
• 1-component ready to use
• Water based
• Quick drying
• Liquid-proof
• Good crack bridging capacity
• Suitable for trowel and roller application
• Light gray

Areas of application

The product is used for:

• Waterproofing shower rooms
• Waterproofing bathrooms

The product is used on the following substrates:

• Concrete and cement substrates
• Dry screeds
• Plasterboard
• Plaster bricks
• Construction plaster
• Ceramic tiles

Noticed :

• The product can only be used for interior applications.

Application

Expansion joints and floor/wall connection joints:

1. Apply the product in adhesive form evenly to the surface using a roller or trowel.
2. Treat with the appropriate Sika SealTape F tape and the appropriate interior/exterior components

Pipes and gutters in the ground:

1. Apply the product in adhesive form evenly to the surface using a roller or trowel.
2. Seal with Sika SealTape F.

Coating system:

1. Apply the primer to the prepared substrate.
2. Pour the product onto the substrate.
   Note: Consumption is specified in application information.
3. Apply the product evenly to the surface using a roller or trowel.
4. After the inter-coat waiting time, apply a second coat to the surface with a roller or trowel.
5. After the final waiting time, lay the tiles on the covering.

Consumption

1.2 kg/m² in total, applied in two coats

Packaging

7 kg bucket

Old name: Sikalastic-220 W