Sikatack panel Tape SW 398 - Double-sided adhesive - Sika

Sikatack panel Tape SW 398 - Double-sided adhesive - Sika

Self-adhesive double-sided mounting tape for instant fixing of facade panels until the SikaTack-Panel adhesive has fully hardened.

Areas of application

• To calibrate the minimum thickness of 3 mm for the glue layer.
• The tape is applied along the entire length of the supporting structure.

Features

• Closed-cell polyurethane foam tape
• White in color

Application

1. Apply the SikaTack-Panel mounting tape along the entire length of the vertical profiles and parallel to the edges, do not yet remove the protective film.
2. Apply SikaTack-Panel adhesive in a triangular bead using the triangular tip included in the supply (width 8 mm, height 10 mm) at least 5 mm away from the mounting tape and the lateral edge of the profile.
3. Remove the protective film from the SikaTack-Panel mounting tape.
4. Place the facade panel to be glued in the desired location on the glue beads without it already touching the mounting tape.
5. To facilitate assembly, the panels can be placed on battens or fitted angle brackets.
6. Position the panel precisely and tighten until it touches the mounting tape.

Consumption

3 mm²

Packaging

Roll 33 m x 12 mm x 3 mm

FAQ - Frequently Asked Questions

1. What is the purpose of SikaTack Panel Tape SW-398?
   It serves to temporarily hold the facade panels in place while the SikaTack Panel adhesive cures. It also ensures a consistent thickness of the adhesive joint.
2. Can this tape be used alone to fix a sign?
   No, this is not a standalone structural adhesive. It must be used with SikaTack Panel adhesive as part of the complete system.
3. What is the thickness of the ribbon?
   The tape is approximately 3 mm thick, which ensures the correct thickness of the adhesive joint.
4. On what materials can it be used?
   It is compatible with the substrates of the SikaTack Panel system, aluminium, galvanized steel, HPL panels, fibre cement, composite panels, etc., after proper preparation of the substrates.
5. Is it suitable for outdoor applications?
   Yes, it is specifically designed for cladding systems and exterior facades as part of the SikaTack® Panel system.
6. Should a primer be used?
   Depending on the substrate, a Sika primer may be necessary. It is recommended to follow Sika's technical guidelines to ensure optimal adhesion.