SikaTack Panel Primer - Special primer for planed wood - Sika

SikaTack Panel Primer - Special primer for planed wood - Sika

Special primer for planed wood pieces and facade panels approved by Sika.

Features

• Ready-to-use, single-component products.
• Quick and economical assembly.
• Weather and aging resistant.
• Shock, vibration and wind resistant mounting.
• Uniform distribution of stresses over the total surface area of the facade panel.
• Creative freedom in the design of the facades.
• Aesthetically pleasing surface that is easy to maintain.
• Silicone-free.

Areas of application

• SikaTack-Panel Primer is applied to the wooden frame and to the surfaces to be glued to the panels.
• Special primer for SikaBond adhesives on porous and non-porous substrates.

Application

1. Shake SikaTack Panel Primer well until the steel ball in the container is clearly audible.
2. Shake for an additional minute.
3. Apply SikaTack Panel Primer with a clean brush, evenly, in a thin but covering layer on the substrate.
4. On smooth, non-absorbent surfaces, a solvent-resistant roller or a melamine sponge (e.g., Basotect) can also be used.
5. Apply the primer only once.
6. In the case of highly absorbent surfaces, a second application may be necessary.
7. Close the container tightly immediately after use.
8. The optimal temperature for the surface and application is between 15°C - 25°C.

Consumption

Depending on the absorption capacity of the substrate, 50 ml/m2

Packaging

1 L container.

FAQ - Frequently Asked Questions

1. Is primary school compulsory?
   Yes, as part of the SikaTack Panel system, the use of primer is generally required to ensure the performance and durability of the bond on planed wood.
2. Can it be used on raw, unplaned wood?
   It is designed primarily for planed timber. For other substrates or unprepared wood, it is recommended to consult the technical data sheet or contact Sika's technical service.
3. Can it be used without SikaTack Panel adhesive?
   Not recommended. This primer is specifically developed to work within the complete SikaTack Panel system.
4. How long should you wait before applying the glue?
   Drying time depends on ambient temperature and humidity. Generally, the primer should be touch-dry before applying the adhesive. Always check the technical data sheet.
5. Can this primer be used indoors?
   Yes, but it is primarily intended for facade and exterior cladding applications.
6. What is the average consumption?
   Consumption depends on the porosity of the wood and the application method. A thin, even coat is sufficient.
7. What is the shelf life of the product?
   Refer to the instructions on the packaging. Store in its original closed packaging, away from frost and heat.