Sika Primer-215 - Transparent Primer - Sika

Sika Primer-215 - Transparent Primer - Sika

Sika Primer-215 is a colorless, slightly yellowish primer based on solvents, which reacts to humidity in the air and forms a thin layer.
This layer serves as a bridge between the substrate and the glue.
Sika Primer-215 is specially formulated for the treatment of surfaces before application of single-component polyurethane Sika.

Application areas

• Sika Primer-215 is suitable for a large number of plastics (such as GVK, epoxy, PVC, ABS) and wood.
  Due to the diversity of synthetic materials it is always necessary to carry out tests on the original substrates by observing the local production conditions.
• This product is exclusively reserved for professionals.
  Always pre-test on original substrates and under local conditions to ensure adhesion and compatibility of adhesive and material.

Application

1. Surfaces must be clean, dry and free of grease, oil, dust and other contaminants.
2. Adhesion can be improved by applying and/or combining a pre-treatment, such as: sanding, cleaning and activating before applying the primer.
3. Apply a thin but well-covering layer of Sika Primer-215 with a brush, felt-tip pen or foam applicator.
   The ideal application temperature for product and surface is between 15°C and 25°C.
4. Apply Sika Primer-215 in one coat.
5. Make sure that this layer is well covered.
6. Carefully close the bottle immediately after use.

Consumption

About 50 gr/m² depending on the porosity of the substrate.

Conditioning

• 250ml bottle
• 1 liter container