Décap'graf guard 2010 - Graffiti remover - Guard Industrie

Décap'graf guard 2010 - Graffiti remover - Guard Industrie

Décap'Graf Guard 2010 is a cleaner which eliminates stains and ink or paint residues which could persist after cleaning graffiti. Décap'Graf Guard 2010 is also recommended for cleaning graffiti on protected surfaces.

Advantages

• Eliminates spectra and ink residue
• Strong penetrating power
• Powerful stripper
• Does not alter the supports

Use

Mineral materials: natural or reconstituted stone, concrete, terracotta, tiles, etc.
Facades and exterior.

Implementation

1. Shake the packaging well before use and use the product in its pure state.
2. It is essential to carry out a preliminary test on a small area.
3. Apply Décap'Graf Guard 2010 to the surface to be treated using a brush then work the surface using circular movements.
4. Leave on for approximately 2 to 10 minutes.
5. Rinse thoroughly at low pressure with water as hot as possible (increase the pressure of the hydro-cleaner).
6. Always wet the surface underneath with water.
7. Repeat the entire operation if necessary.
8. Rinse thoroughly with cold water to neutralize.

Application tools

Apply with a brush.

Consumption

3 to 5 m² / liter.

Conditioning

1 L.