Décap'graf guard 2030 - Graffiti remover - Guard Industrie

Décap'graf guard 2030 - Graffiti remover - Guard Industrie

Décap'Graf Guard 2030 is the result of the latest research concerning the removal of tags and graffiti. It does not contain any products dangerous to humans, nature or the ozone layer (without chlorinated, fluorinated, petroleum solvents, NMP, NEP, etc.).

Décap'Graf Guard 2030 is to be used as a first intention on all types of graffiti done with ink or paint. Thanks to its viscosity, Décap'Graf Guard 2030 is particularly well suited if a long duration of action is required, as is the case with porous surfaces.

Advantages

• Eliminates all types of graffiti
• Non-corrosive and non-irritating
• Ready to use
• Does not alter the supports

Use

Porous or slightly porous mineral materials: natural or reconstituted stone, concrete, terracotta, etc.
Facades and exterior.

Implementation

1. Shake the packaging well before use and use the product in its pure state.
2. It is essential to carry out a preliminary test on a small area.
3. For optimal results use Décap'Graf Guard 2030 on wet surfaces.
4. Particularly on porous surfaces, prior wetting of the surface with water will prevent dissolved paints from penetrating into the material.
5. Coat the graffiti copiously with Décap'Graf Guard 2030 then work well with a brush.
6. Leave to act for 10 to 15 minutes until the paint dissolves, then rinse thoroughly with hot water under pressure.
7. If residues or paint stains remain, repeat the operation or use Décap'Graf Guard 2010.
8. Once the graffiti has been removed, rinse the surface with plenty of water. Efficiency depends on temperature; avoid applications below 5°C.

Application tools

Apply with a brush.

Consumption

1 to 3 m² / liter.

Conditioning

1 L and 5 L.