FILAMATT - Wax protection natural effect - Fila

FILAMATT - Wax protection natural effect - Fila

• For maintenance and finishing mate treatments of the terracotta, sandstone stretched, aged marble, natural stone floors.
• It's the perfect finish after the water based waterproofing.
• Ideal on the inside walls in brick and natural stone to avoid loss of dust from the surface.
• FILAMATT is available in packaging of 1 litre and 5 litres.

Benefits:

• Gives a natural effect.
• high concentration product: can be used in various dilutions as required.
• Glossy, it allows to obtain a satin effect.
• Can be completely removed.
• Excellent power self-levelling.

Application:

For the protection of soil and walls: Dilute slightly FILAMATT to make it smoother and easier to spread, adding a glass of water per liter of product. On a surface clean and dry, apply a uniform layer with a car or a cloth (brush for walls) FILAMATT.

Wait until the soil is completely dry (about an hour), then spend a second layer at right angles to the first. It is possible to tread the ground an hour later. If the brilliant to be slightly higher, it is possible to spend a wool cloth or the polisher. On the clay and stones with absorption high (for example, sandstone, quartzite gross), it is preferable to apply a coat of waterproofing beforehand as FILAFOB or FILAW68. 
For maintenance. Renovation of protection (every 2-3 months): after cleaning the surface with a solution of diluted FILACLEANER (1: 200), apply FILAMATT dilute 500 ml in 5 litres of water. Once dry the floor can be walked. Reinstating coverage (1 time per year): apply the slightly diluted wax (200 ml of water per liter of product.) with a car, a cloth or other applicator. Once the product dry, the floor can be walked. Dust treatment: on a dry surface, apply a uniform layer of the product with a brush FILAMATT pure. After about an hour, the treated surface is dry.

Performance: 

• For terracotta, 1 litre of FILAMATT cover 30 m².
• For stone, 1 litre of FILAMATT cover 30/40 m².

Attention: It is possible to remove the product using the specific cleaner for waxes water FILAPS87. It is not recommended to use the product on the outside surfaces in wet locations and there or stagnant water (baths, showers). The product that can modify the appearance of the material, test previously the product on a small area.