Hydrorep Eco - Waterproof protector - Fila

Hydrorep Eco - Waterproof protector - Fila

Hydrorep Eco = EX Fila HP98

• Water repellent with natural effect.
• Deeply impregnates the material, while maintaining breathability.
• Prevents the growth of algae, mold, lichens.
• Protects from the action of degradation caused by atmospheric agents.
• Product available in packaging of 1 liter and 5 liters.

Benefits: 

• Vegetation barrier certified by tests carried out in accordance with the UNI EN ISO 846:1999 method.
• Ideal for the protection of exterior walls.
• UV resistant.
• Does not change the frost resistance of terracotta.
• Blocks efflorescence.
• It can be applied to surfaces with residual moisture: very short application times.
• The treatment maintains the level of transpirability of the material at more than 90%.

Application: Use biocidal products with caution. Before use, read the label and product information 

On a dry, clean surface, apply the product by saturating the support with a brush. Before the product dries, remove any residues with a clean cloth. The surface is dry after only 4 hours. RESERVED FOR PROFESSIONAL USE: on vertical surfaces, apply by spraying (airless system) by dosing the product to be dispensed and using the appropriate PPE, as indicated in the safety data sheet.

Yield:

• For terracotta, facing bricks, clinkers, stone and plasters, 1 liter of product will cover 10-20 m².
• For cement, 1 liter of product will cover 8-10 m².

Caution: Test the product on a small area to check for possible color changes. Avoid accumulations of unabsorbed product. If it starts to rain during treatment, stop the application and cover the entire surface. Do not apply the product in case of rain forecast. Any persistent residues of the product can also be removed even when the product is dry, using FILAPS87 diluted in a ratio of 1:10, with the white disc. Avoid applications in the presence of condensation on surfaces or under the direct action of the sun. The product is effective after 24 hours after application and protection is maximum after 10 days.

Formerly: HP98 Wires