FILAW68 - Protector for non polished surfaces stain - Fila

FILAW68 - Protector for non polished surfaces stain - Fila

• Permeates and protects against dirt greasy, absorbent materials such as rough natural stone, terracotta and cement.
• Greatly reduces the absorption of the material without altering the aesthetic aspect.
• Suitable for indoor and outdoor ground.
• On inland soils as a basis for protection before the wax.
• The product has properties anti-graffiti: by protecting the surface, it allows an easy elimination of graffiti when cleaning.
• Available in packaging of 1 litre and 5 litres.

Benefits:

• Natural effect: it does not change the appearance.
• Water based: more ecological treatment and work time very reduced because it can be applied on surfaces with residual moisture.
• Does not superficial film.
• Does not change the resistance to frost of terracotta.
• Excellent also for cement surfaces.
• Certified "suitable for the contact with food".
• Product at very low VOC emissions: certified by GEV and bearing the label EC1Plus.

Application:

• Ready to use, no dilution necessary product.
• Inner surfaces in terracotta and rough stones : On the clean surface, apply with a brush or rag a car one layer of FILAW68 on a regular basis, also permeating the joints. After 4 hours, apply a layer of FILAJET. Wait at least one hour, then apply a layer of wax to finish according to the desired aesthetic effect)FILAMATT : natural; FILASATIN : Satin; FILACLASSIC and FILALONGLIFE (: brilliant).
• Inner surfaces in terracotta and polished stones : On the clean surface, apply with a brush or rag a car one layer of FILAW68 on a regular basis, also permeating the joints. After 4 hours, apply a layer of wax to finish according to the desired aesthetic effect)FILAMATT : natural; FILASATIN : Satin; FILACLASSIC and FILALONGLIFE (: brilliant).
• Terracotta, stone and concrete exterior surfaces : On the surface clean and dry, apply with a brush or the car 2 layers on FILAW68 on a regular basis, also permeating the joints.
• Maintenance: diluted solution FILACLEANER.

Performance: 

• For the Earth cooked (Imprunetino, rustic, polished), 1 litre of FILAW68 Fila will cover 15-20 m².
• For the terracotta (handmade, flat bricks, bricks, terracotta of Spain), 1 litre of FILAW68 Fila will cover 7/10 m².
• For stone, 1 litre of FILAW68 Fila will cover 10/20 m².

Caution: Test the product on a small area to check possible changes of color. Do not apply in the event of rain forecast.