FilaStop Dirt - protection against dirt for sandstone - Fila

FilaStop Dirt - protection against dirt for sandstone - Fila

• Facilitates and speeds up the cleaning of surfaces and improving hygiene.
• Improves the resistance of the material to the dirt.
• Allows the material to retain its appearance over time.
• The product is available in 500 ml packaging.

Benefits: 

• Extended protection in time.
• Applicable to the outside and inside.
• High-performance
• Does not change the original anti-slip degree of material (tests carried out according to the methods B.C.R.A and ASTMC 1028-2007).
• Does not surface film.
• Resists UV rays aus and does not yellow.

Performance: 

 For the brilliant sandstone structure, natural and Lappato, 1 bottle of 500 ml of FilaStop Dirt Fila will cover up to 35 m².

Application after the installation of the new surface:

1.  Wash the floor with DETERDEK (cement joints) or FILACR10 (epoxy seals).
2. On the floor is clean and dry, apply the FILASTOP DIRT uniformly on the surface (including joints) with a cloth or other suitable means of application. Expert's advice: given the high performance of the product, apply a moderate amount of product to treat a surface of 2-3 m at a time.
3. Scrub the surface with a cloth or a mono-brosse with a white disk.
4. In the 10 minutes that follow, eliminate completely any excess product manually or with a mono-brosse and a microfibre cloth.

Attention: Can revive the color of the material and/or the joint. Check beforehand the effect reviving on a small surface. Ventilate the room during use. Do not apply on the sandstone honed finishing mate.