SikaFloor-02 Primer - Special acrylic primer before EC 1 PLUS leveling compound - Sika

SikaFloor-02 Primer - Special acrylic primer before EC 1 PLUS leveling compound - Sika

Sikafloor-02 Primer is a single-component acrylic resin primer for non-absorbent substrates, to be used before the application of levelling mortars and tile adhesives .
EC 1 PLUS label: very low VOC emissions .

Features

• Single-component
• Provides optimum adhesion on non-absorbent surfaces
• Low consumption / high covering power
• Compatible with underfloor heating
• Short waiting time
• EC 1 PLUS label: very low VOC emissions .
• Easily applicable with a roller
• Ready to use

Areas of application

Use as a primer for:

• Improve adhesion on smooth, healthy and non-absorbent surfaces
• For indoor use only

Application

1. Strictly follow the installation procedures as defined in the Application Methods, Application Guides and Work Instructions which must always be adapted to the actual situation on site.
2. Apply the primer to the prepared surface using a short-haired roller or applicator pad.
3. Ensure a continuous application without small holes/pinholes, well covering the entire surface.
4. Avoid the formation of puddles.
5. Ensure that the waiting time is respected before applying the next coat.

Consumption

~125 g/m2.
This figure is theoretical and does not take into account additional material due to surface porosity, roughness of the support, differences in levels, or loss of material during work, etc.

Packaging

5kg and 12kg.