Deks Olje D2 - High gloss oil varnish - Owatrol

Finish for exotic woods based on alkyd resins specially developed for marine use.

Packaging:
8 Items
€33.90Tax Included
€34.94- 3%

Volume discounts

QuantityYou SaveUnit price
35 %€33.20
OWA 2312
3297971108416

Deks Olje D2 - High gloss oil varnish - Owatrol

Finish for exotic woods based on alkyd resins specially developed for the navy.

Properties :

  • Resistant and flexible film that avoids the risk of blistering, cracking or flaking.
  • Shiny and durable appearance.
  • Fluid transparent varnish – does not hide the grain of the wood.
  • Provides long-lasting protection thanks to the presence of anti-UV agents. Easy maintenance by simple regular cleaning of the surfaces with fresh water.
  • Very good resistance to dry and wet abrasion (especially salt water).
  • The practical performance varies according to the type of use, the surface condition, the absorption of the support as well as the mode of application.
    10 to 12 m2 / liter per coat (in theory).

Substrate preparation:

  • The wood must be sanded before treatment with D1.
  • The wood must be clean and perfectly dry during application.
  • Do not apply D2 in wet weather or late in the afternoon.
  • As the varnish can make the surface slippery, it is preferable, in the case of passage areas, to use only D1.

Application :

  1. Treat the wood beforehand with D1 (see technical data sheet) and leave to dry for 24 to 72 hours. The wood must be dry and not sticky before applying the 1st coat of D2.
  2. Apply 4 to 6 coats of D2 depending on the exposure of the support.
  3. Leave to dry for at least 12 hours between each coat (or even at least 24 hours depending on the temperature and the relative humidity of the air).
  4. There is no need to sand between coats. However, for an even brighter varnish, sand the penultimate coat with a very fine abrasive paper (400) soaked in D1. Let the surface dry for 1 hour.
  5. Apply the last coat of D2. To have a uniform surface, you can apply the last coat with a spalter.
  6. Leave to dry for 1 week before commissioning.

NB: splashes or drips of varnish must be removed before the product dries. After drying, stains are very difficult to remove, so be very careful and remove these stains immediately after application.

destination:

  • Outside.
  • Exotic woods (Teak, Ipé, Mahogany, Movingui, …) new or old.
  • Interior: panelling, doors, windows.
  • Horizontal - vertical.
  • On the boat, the D2 is used for all work above the waterline.

Conditioning :

1L and 2.5L.

Owatrol
OWA 2312
8 Items

Data sheet

Signal word
As of Q2 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard statements
H412 – Harmful to aquatic life with long lasting effects.
Hazard pictogram

Specific References

EAN13
3297971108416
There are no reviews for this product yet.

You might also like

Customers who bought this product also bought: