Rustol C.I.P. - High resistance anti corrosion primer - Owatrol

Rustol C.I.P. - High resistance anti corrosion primer - Owatrol

Rustol CIP (Corrosive Inhibiting Primer) is an anti-corrosive that can be covered with different types of coatings .
Special difficult conditions.

Properties :

• Universal undercoat before all types of paint without risk of distemper or poor adhesion of subsequent coats (except xylene paints).
• Applies to new or oxidized substrates indoors and outdoors.
• Lasting action by penetration and passivation of the support; perfect insulation from sound metal, exceptional adhesion.
• Reinforced protection thanks to active pigments and perfect film-forming qualities.
• Easy to use, does not require prior sanding of the support.
• Temperature resistance up to + 175°C.
• Yield: 15 m²/l
  The practical yield varies according to the type, the state of surface.

Substrate preparation:

The substrate must be degreased and free of any brushing/sanding residue before applying Rustol CIP.

1. Oxidized Support: Rustol CIP uses sound, non-friable rust for optimum adhesion.
   • Remove crumbly rust by simple brushing.
   • Degrease using a non-oxidizing solvent such as White-Spirit, acetone.
2. New, non-oxidized support: It is absolutely necessary to prepare the support meticulously (degreasing with white-Spirit or acetone + sanding grit 60-120).

Applications:

• Interior Exterior
• Rustol CIP is recommended in all cases of severe ambient conditions: maritime or tropical climates, corrosive vapours, protection of motor vehicles, public works equipment and boat ballasts which it effectively protects.
• Rustol CIP is especially recommended as an undercoat when two-component paints or paints with high solvent power (urethanes, epoxies, chlorinated rubber, synthetic bodywork, etc.) are used as an overlay.

Conditioning :

0.75L, 2.5L and 20L.