Cosmofer - Universal polyeter putty - Owatrol

Cosmofer - Universal polyester putty - Owatrol

Allow your objects to resist external aggressions with Cosmofer universal polyester putty .
True cold welding.

Fills, clogs , closes, joins , seals, insulates, glues , fixes and equalizes irregularities on many supports.
Very easy to sand , it is essential for all your repairs .

Properties :

• Excellent adhesion to most substrates: metal, aluminium, wood, stone, polyester,...
• Very easy to use - easy sanding.
• Possibility to adjust the setting time as needed.
• Once hardened, can be mechanically machined, drilled, tapped, filed, ground, sawn, screwed...
• Can be covered with any type of paint (single or two-component).
• Good resistance to heat (120°C), vibration, and chemicals
• Very elastic - won't split or crack; does not clog abrasives.

Application :

1. Recommendations before application:
   The support must be clean, dry, not oxidized, dusted and degreased.
   First remove any remaining corrosion and old finish.
   The support should be as rough as possible.
2. Product preparation:
   Add 2% hardener to the mastic to obtain a grip in 10 minutes. In cold weather, increase the dose of hardener while in hot weather reduce it.
   The quantity of hardener will regulate the setting time without any effect on the final hardening.
   Example of average proportion: A coffee bean of hardener for a knob of Cosmofer putty.
3. Application :
   Mix the Cosmofer putty and the hardener. Once the mixture has been made, masticate the parts to be filled using a spatula.
   Apply a coat necessary for the repair. Hardening is uniform without shrinkage. One application is enough.
   After hardening, sand (grain 100) to obtain a perfectly smooth area for possible finishing (painting or other).
4. After application:
   Clean tools immediately after use.
   Be careful not to incorporate the rest of the mastic/hardener mixture into the pot of pure mastic.

Application areas :

• Car/Mobile home: bodywork pierced by rust, dented, torn or thinned sheet metal, large cavity, hole, bump, crack, leveling, fairing, casing, tank, radiator, storage battery compartment.
• Caravan: bodywork repair, sealing, leakage.
• Motorcycle: fairing, helmet, tank, crankcase.
• Marine: boat hull and deck in wood, metal or polyester, corrosion protection.
• Building: sealing and cracks in concrete, brick, concrete block, sealing of metal, concrete or polyester tanks, pipes.
• Do-it-yourself: repair of objects in rigid plastic, PVC, polyester, ABS, potiche, basin, model, scale models.
• Electricity: all insulation (12,000 volts per mm) battery compartment.
• Agriculture: tank, tub, tank, cistern, water trough, barrel, trough, tractor and agricultural machinery.
• Central heating: pipes, radiator, boiler, pump, thermal insulation.
• Plumbing: supply and drain pipes, fitting, junction of pipes, siphon, toilet flush, water heater, sink, sink, bathtub.
• Cover: roof, downspouts, gutter, gutter, frame, vasistas, skylight.
• Locksmithing: fence grid, door, closure and metal curtain, shutters, wrought iron.
• Foundry: blowholes, molding defects, lack of material, porosities, cracks, moulds, models, prototype parts.

destinations:

• Indoor / Outdoor - Horizontal / Vertical.
• Adheres to ferrous and non-ferrous metals (aluminium, copper, lead, etc.), wood, concrete, stone, marble, fiber cement, sandstone, mosaic, PVC, polyester, ABS, etc.

Conditioning :

250g and 1kg.