Sanixyl - Fungicide and insecticide for wood - No BE - Owatrol

Sanixyl - Fungicide and insecticide for wood - No BE - Owatrol

Sanixyl a fungicide and insecticide , this treatment allows you to effectively and sustainably eliminate fungi and mold from your wood .

Its high-performance formula eliminates and prevents the appearance of fungi.
Your wooden supports are therefore protected all year round.
Ideal for maintaining your wood.

Properties :

Preventive, yield 5 m² per liter :

• Insects: capricorns, beetles, lyctus, termites.
• Cubic rot and wood discoloration fungi (blueing in service**).

Curative, yield 3 m² per liter :

• Insects: capricorns, beetles, termites***. Eliminates all insects in depth and prevents any reinfection.

** On wood already installed.
*** Concerning termites, the curative action will be implemented by a qualified professional who will absolutely treat the floors and walls.
Termed wood, depending on its state of infestation, may or may not need to be replaced.

• The performance may vary depending on the condition of the surface, the absorption of the support and the method of application.
• Enriched formula: anti-termite and anti-bluing in service**.
• Easy to apply. Ready to use. Excellent penetration.
• Not fat.
  Colorless and odorless.
  Non-flammable.
• Aqueous phase.

Recommendations before application:

• Wear appropriate protective clothing, gloves and eye and face protection.
• Do not use the treatment near a heat source.
  Do not treat hives.
• Shake the product before application.
  Ventilate the application area.
• Apply to bare, dry, clean, dusted, stripped or sanded wood without any trace of old coating.
  On attacked wood: probe, pyre**** the wood in large sections or brush the attacked and crumbly parts using a brass brush.
  **** It is recommended to reinforce or replace excessively damaged parts which would be weakened and no longer offer a sufficient guarantee of resistance.

Application :

1. On new, healthy wood: brush abundantly until the support is saturated or spray with a garden sprayer, taking care to adjust the nozzle so as not to cause a mist. Emphasize the ends.
2. On attacked wood: probe then burn (eliminate the worm-eaten parts).
3. Reinforce or replace parts that are too weakened.
4. Brush, for small sections of wood, to saturation, particularly on the ends.
5. On heavily damaged wood: drill in a staggered pattern every 20 cm for large sections and every 40 cm for smaller sections then inject Sanixyl.
6. Finish with a surface brushing.
7. Can be used by dipping: contact us.

NB: Clean the tools immediately after use.

Destinations:

• Healthy or damaged interior wood: vertical and horizontal supports (paneling, stairs, parquet floors, furniture, etc.).
• Healthy or damaged exterior wood: vertical supports (cladding, frames, etc.) excluding hardwoods.
• Effective for employment classes: 1, 2 and 3a.

Conditioning :

1 L, 2.5 L and 10 L.