MN Cement Remover - Cement remover for natural stones - Lithofin

MN Cement Remover - Cement remover for natural stones - Lithofin

This very powerful cleaner contains a specific combination of acids and rust removers.

Lithofin MN Cement Remover dissolves and removes cement film, mortar residue, efflorescence, limescale deposits, dirt, rust and rust discolouration.

Eliminates yellowing due to rust from stones containing iron and prevents its recurrence.

Technical specifications :

• Density: approx. 1.2g/cm3
• pH: < 1(concentrate)
• Appearance: transparent, reddish
• Smell: fresh and pleasant

Application domain :

Removing cement films from new coatings, basic cleaning of old coatings and removing rust and rust discoloration.

Lithofin MN Ciment Remover is particularly suitable for cleaning gneiss (Serizzo, Cresciano, Calanca) and granites (Blanc Sarde etc.) which contain iron.

Manual :

1. Depending on the type and degree of fouling, apply Lithofin MN Cement Remover pure or diluted in 10 volumes of water and spread with a brush.
2. After a few minutes, brush and eliminate completely by rinsing with water.
3. If necessary, repeat the procedure.

Tip: Cases of stubborn discoloration due to rust should be treated with Lithofin BERO . This product is also necessary on very dirty floors cleaned with Lithofin MURO .

Warning: Lithofin MN Enlève Ciment is not suitable for polished and honed surfaces of limestone, marble, concrete, terrazzo. If in doubt, test on an inconspicuous surface. Surfaces and elements sensitive to acids such as anodized surfaces, glazed wood, chrome, marble etc. must be protected from splashes.

Yield :

• about 30 to 50 m²/L depending on the clogging and the type of soil treated.