MN Multi-Cleaner - Natural stone cleaner - Lithofin

MN Multi-Cleaner - Natural stone cleaner - Lithofin

Lithofin MN Multi-Cleanser is a special medium alkalinity cleaning product without solvents.

This concentrate contains a balanced combination of high performance cleansing cleansing agents.

Lithofin MN Multi-Cleanser dissolves and removes greasy and oily dirt, shiny films, residues of floor care products, thin films of wax and general dirt.

Technical specifications :

• Density: approx. 1.0g/cm³
• pH: approx. 9-10 (concentrated)
• Appearance: transparent, colorless
• Odor: non-specific, aromatic

Application domain :

This product can be used both indoors and outdoors for cleaning natural stone surfaces and polished, honed or carved marble of all kinds.

Particularly suitable for the basic cleaning of old, dirty coatings.

Ideal for removing mineral films on polished marble.

Manual :

1. Depending on the degree of fouling, Lithofin MN Multi-Cleanser can be applied pure or diluted in 5 volumes of water; if necessary, brush while applying.
2. Leave on for 10-20 minutes, brush with water and rinse until clear water is obtained.
3. Do not let the product dry out; if the coating is not very dirty, dilute with water.
4. On the other hand, if the coating is very dirty, repeat the procedure.

Caution: do not treat delicate surfaces with Lithofin MN Multi-Cleanser. If in doubt, test on an inconspicuous surface.

Yield :

• Approximately 5 to 10 m²/litre depending on soiling.
• More than 30 m²/litre diluted.