Sika FastFix-131 - Jointing sand for clinkers and pavers - Sika
Sika FastFix-131 is a moisture-hardening jointing material for all types of paving stones with joints from 2 to 12 mm wide.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
20 | 8 % | €47.78 |
40 | 15 % | €44.15 |
Sika FastFix-131 - Jointing sand for clinkers and pavers - Sika
Sika FastFix-131 is a moisture-hardening grouting material , specially designed for joints with a width of 2 to 12 mm.
It is suitable for all types of paving stones , slabs and clinkers.
Features
- Ready to use.
- Suitable for all types of paving stones.
- Quicker to implement than traditional grouting methods.
- Once hardened, the joints do not wash away under the influence of rain.
- Resists weed growth and insect invasion.
- Will not stain or discolor pavers.
- Ages naturally in the same way as paving.
- Color: Brown-Yellow
Application areas
Sika FastFix-131 is a sand-based grouting material intended for all types of paving stones:
- Garage aisles.
- Pedestrian paths.
- Garden paths, landscaping.
- Places.
- Patios.
- Terraces.
Sika FastFix-131 is intended for grouting paving subject to medium traffic: pedestrians, light vehicles.
The product was not designed to withstand heavy traffic.
Application
- We recommend carrying out a few tests on an inconspicuous area or on offcuts from the paving stones before application.
- Use the product in small, manageable quantities and avoid spreading it all at once over too large an area.
- Sweep the product into the joints using a broom, ensuring that each joint is completely filled.
If there is a risk of rain before the product hardens, protect the surface to ensure a smooth result. - Sweep up any excess product immediately as this will be more difficult after the product has hardened.
- Compact the joints using a vibrating plate compactor or simply using a wooden board and a hammer.
- Spray water on the joints until saturation using a garden hose or a watering can fitted with its head.
- Above all, do not use water under pressure.
- Make sure the joints are completely saturated with water.
- Rinse off any excess product remaining on the surface.
- It is allowed to drive on the surface immediately after finishing/activating it, but it is better to wait until the surface has completely dried.
- Curing is usually achieved after 1-2 days, but the time to complete curing depends on temperature.
Curing will be slower at lower temperatures. The product will harden completely after approximately 28 days.
Consumption
Depends on the dimensions of the slabs or paving stones, the dimensions of the joints and the type of support.
For information :
Pavers: 2 to 5 m2 per 20 kg bag
Slabs: 10 to 20 m2 per 20 kg bag
Conditioning
20 kg bag.
Former reference: SIK 486751
Data sheet
- Signal word
- WARNING
- Hazard statements
- H319 – Causes serious eye irritation.
- Hazard pictogram
-
GHS07 - Harmful
Specific References
- EAN13
- 5055492701718
Très facile à mettre en œuvre, rendu super avec des pavés couleur saumon. Je recommande vivement ce produit.
Très satisfait de ce produit. Pratique et facile à mettre en œuvre . Un conseil supplémentaire : avant d’arroser, un petit coup de souffleur à feuille n’est pas inutile pour enlever le reste de poussière.
produit bien emballé et éfficace.Livraison rapide.
Le produit n’a pas été livré à l,adressé indiquée mais à la poste d’ebreuil a 15 km. Alors que l’avais commandé sur votre site pour être livrée à domicile.
Parfait