Oléoflor - Water repellent - Zep Industries

Oléoflor - Water repellent - Zep Industries

Waterproof against water infiltration and eliminates the harmful effects of frost and humidity (cracks, erosion, breaks in supports).
Non-stick coating that protects porous floors on pedestrian streets, gas station sidewalks , etc.

Properties :

• Oil repellent: against the penetration of oils, greases and dirt.
• Waterproof against water infiltration and eliminates the harmful effects of frost and humidity (cracks, erosion, breaks in supports).
• Non-stick coating that protects porous floors on pedestrian streets, sidewalks, etc.
• Resists chemical attack: provides resistance to acid rain and fouling caused by atmospheric pollution.
• Prevents greasy stains from sticking to materials, chewing gum is easily removed.
• Prevents the formation of mold and saltpeter.
• The appearance of the support remains unchanged.
• Allows materials to breathe.
• The effectiveness of the treatment lasts for several years.
• UV resistant
• Suitable for protecting most graffiti.
• Oléoflor permanently limits the infiltration of water, oils and grease on stones, concrete, coatings, bricks, plaster, tiles, slabs, floor tiles, etc.

Applications:

Masonry and construction companies, DDE, maintenance services, town halls, historical monuments, etc. For the protection of interlocking paving stones in pedestrian streets, for the protection of building facades, houses, buildings, tiled and fiber cement roofs built on slopes. For the protection of sculptures, monuments against the harmful effects of rain in parks and public gardens, archaeological updates, etc.

Instructions for use:

1. In all cases, clean the support, rinse with water, let it dry.
2. Use neat. Apply with a brush or sprayer.
3. Spray pure Oléoflor from a distance of 30 cm over the entire surface until saturated.
4. Often, a single coat is sufficient. However, for very porous surfaces, a second coat is necessary as soon as the glossy appearance of the first coat has disappeared.
5. Always treat from top to bottom on vertical supports. Leave to dry for 24 hours.
6. Coverage: depending on the porosity of the materials = 2 - 10 m2 per liter. It is preferable to carry out a preliminary test on the surface to be treated.
7. When dealing with new masonry, it is advisable to wait 28 days before carrying out the treatment.
8. Cleaning the equipment: water.
9. Optimal effectiveness: 7 days after application.

Packaging:

5 Liters & 20 Liters.

FAQ – Oléoflor Hydrofuge

1. Does this product change the appearance of my patio or paving stones?
   No, Oléoflor is completely invisible and does not yellow. It respects the color and natural appearance of the materials.
2. Can I use it around a swimming pool?
   Yes, the product is ideal for pool decks. It protects against chlorinated water splashes, sunscreens, and grease.
3. How long is it effective?
   On average, protection lasts 3 to 5 years depending on exposure to weather and foot traffic.
4. Is it compatible with all media?
   Oléoflor is recommended for porous surfaces (stone, concrete, paving stones, rough tiles). It is not suitable for non-porous materials or those already treated with a waterproofing film.
5. Can the product be applied by yourself?
   Yes, the application is simple and does not require professional equipment. However, it is advisable to prepare the surface well for optimal results.
6. How do I know if my soil needs re-application?
   Pour a little water on the surface: if the water seeps in instead of beading, it is time to repeat the treatment.
7. Is it dangerous for the environment?
   Oléoflor is formulated to minimize its environmental impact. However, it should not be discharged directly into the environment or into unsuitable drains.