Oleoflor - Water repellent - Zep Industries

Oleoflor - Water repellent - Zep Industries

Water repellent against water infiltration and eliminates the harmful effects of frost and humidity (cracks, erosion, breakage of supports).
Non-stick which protects the porous floors of pedestrian streets, sidewalks of gas stations, etc...

Properties :

• Oil-repellent: against the penetration of oils, greases and dirt.
• Water repellent against water infiltration and eliminates the harmful effects of frost and humidity (cracks, erosion, breakage of supports).
• Non-stick that protects porous floors on pedestrian streets, sidewalks, etc.
• Resists chemical attacks: provides resistance to acid rain and clogging caused by atmospheric pollution.
• Prevents greasy dirt from attaching to materials, chewing gum is easily removed.
• Prevents the formation of mold and saltpeter.
• The appearance of the support remains unchanged.
• Let the materials breathe.
• The effectiveness of the treatment lasts several years.
• UV resistant
• Suitable for protecting most graffiti.
• Oléoflor sustainably limits infiltration of water, oils, grease on stones, concrete, coatings, bricks, plaster, tiles, slabs, tiling, etc...

Applications:

Masonry and construction companies, DDE, maintenance services, town halls, historic monuments, etc. For the protection of interlocking paving stones on pedestrian streets, for the protection of facades of buildings, houses, buildings, tile and fiber cement roofs built on a slope. For the protection of sculptures, monuments against the harmful effect of rain in parks and public gardens, archaeological updates, etc...

Manual :

1. In all cases, clean the support, rinse with water, let dry.
2. Use pure. Apply by brush or spray.
3. Spray pure Oléoflor from 30 cm over the entire surface until saturation.
4. Often, one coat is enough. However, for very porous surfaces, the application of a second coat is necessary as soon as the shiny appearance of the first coat has disappeared.
5. Always treat from top to bottom on vertical supports. Leave to dry for 24 hours.
6. Covering power: depending on the porosity of the materials = 2 - 10 m2 per liter. It is preferable to carry out a preliminary test on the support to be treated.
7. When it comes to new masonry, it is advisable to wait 28 days before carrying out the treatment.
8. Equipment cleaning: water.
9. Optimal effectiveness: 7 days after application.

Conditioning :

5 Liters & 20 Liters.