ProtectGuard FT - Water and oil repellent - Guard Industrie

ProtectGuard FT - Water and oil repellent - Guard Industrie

ProtectGuard FT water , oil and stain repellent for floors is the reference solution for protecting all low-porous materials used in buildings (architectural concrete, Burgundy stone, unpolished or uncrystallized marble and granite, etc.) or having to undergo intensive traffic.
Thanks to its exceptional penetration and abrasion resistance capabilities, ProtectGuard FT is the perfect protective treatment for porous or low-porous materials on surfaces subject to high traffic.

Advantages

• Protection against water, oil, stains and graffiti
• Resists abrasion
• Does not form a film, lets the support breathe
• Odorless and invisible: does not change color
• UV and frost resistant
• Delays aging and facilitates maintenance

Use

• Low porous materials: natural stone (travertine, Bavarian stone, blue stone, etc.) or reconstituted stone, concrete, sandstone, etc.
• Floors and facades
• New or old
• Inside and outside
• Recommended for terraces, driveways, pedestrian areas, swimming pool decks, facades, stairs, etc.

Implementation

Substrate preparation

1. Apply the product to a clean, dust-free, degreased and dry surface.
2. Rinse thoroughly until the surface is free of all traces of cleaner.

Application

1. Use the product in its pure state, do not dilute.
2. Shake the packaging well before use and carry out a preliminary test.
3. The support must be impregnated until saturation in a single coat.
4. Do not overload the support, remove any excess before drying.
5. On vertical supports, apply from bottom to top.
6. Protected drying: 24 hours.
7. Optimal effectiveness obtained after 7 days.

Application tools

Apply with a low pressure sprayer, roller or brush.

Yield

For one liter:

• Granite 12.00 m²
• Marble 10.00 m²
• Concrete 5.00 m²
• Concrete sanded and polished 20 m²

Conditioning

1L, 5L and 25L.

Formerly: ProtectGuard FT Pro - Oil and water repellent - Guard Industrie