SikaGard-6250 - Thixotropic Wax - Sika

SikaGard-6250 - Thixotropic Wax - Sika

SikaGard-6250 is a white wax without aromatic solvent which has excellent anti-corrosion properties.
It effectively protects car body cavities against corrosion , it is easy to apply and has excellent final properties.

SikaGard-6250 is very heat resistant.
After drying, a slightly sticky white wax film remains which protects the cavities from corrosion.

Features

• Excellent resistance to road salt
• Very good ability to form a film
• Exceptional sealing
• Good behavior at low temperature
• Resists high temperatures
• Without aromatic solvent
• Good application properties (no haze, no dripping)
• Always flexible

Application areas

• SikaGard-6250 is a sprayable anti-corrosion coating for the repair and protection of hard-to-reach areas of vehicles such as door panel cavities, side panels, engine hoods, trunk lids, fenders, sills, reinforcements and uprights.
• Thanks to its very high temperature resistance (up to 180°C), SikaGard-6250 can also be used for engine protection.
• The product can be sprayed without forming a mist and does not run into the evacuation openings.
• SikaGard-6250 has very good adhesion to different paints: primed metals, metals and PVC without any pre-treatment.
• This product is exclusively reserved for professionals.
  Tests on real substrates must be carried out to check the adhesion and compatibility of the product.

Application

1. SikaGard-6250 can be applied using an airmix gun with an air pressure of 3 to 6 bars.
2. Shake the can approximately 40 times before use.
3. Protect surrounding areas before spraying.
4. Spray at room temperature and at a distance of 25 cm from the surface or into the cavity using a flexible hose.
5. Use existing access points or create new ones by drilling through holes.
6. Spray an even layer.
7. Do not spray brake systems or exhaust.

Conditioning

1 L in Translucent White.