SikaFloor-300 Level - EC 1 PLUS leveling compound - 1 to 10 mm - Sika

SikaFloor-300 Level - EC 1 PLUS leveling compound - 1 to 10 mm - Sika

Self-leveling cement- based leveling compound with very low VOC emissions, for interior application only.
Sikafloor-300 Level is characterised by its smooth finish, particularly low shrinkage and good self-levelling properties.
Suitable for medium use.
EC 1 PLUS label: very low VOC emissions .

Features

• Self-leveling
• Compatible with underfloor heating
• Layer thickness up to 20 mm if aggregates are added
• Resistant to office chair castors according to EN 12 529 if the thickness is greater than 1 mm
• Pumpable
• High hardness and strength values
• Low surface porosity
• Very smooth application
• Can be sanded very easily
• Modified by polymers
• Drying by hydration
• EC 1 PLUS label: very low VOC emissions .
• High capacity for smoothing irregularities in the support
• Low voltage

Areas of application:

Sikafloor-300 Level is suitable for smoothing, levelling and levelling suitable substrates before laying parquet, ceramic tiles, seamless synthetic resin floor coverings, textile or elastic floor coverings, inside residential and non-industrial buildings.

Application

1. Pour in the mixed leveling compound and spread using a notched trowel or scraper, or an adjustable scraper with a handle.
   Then remove the air occlusions with the de-bubbler roller.
   When using an adjustable handle scraper, it is generally not necessary to remove the marks left by the scraper with a debullating roller, or to level more than once.
2. Peripheral joints and expansion joints must be considered up to the finished surface.
   Avoid introducing equalizing mass.
3. The leveling layer must be sufficiently thick and the surface sufficiently flat, as indicated by the manufacturer of the tiles or floor covering.
4. In case of thicker layers, avoid contact with vertical structures by placing an insulation strip on the perimeter.
5. If a second levelling coat is to be applied, the first coat must be primed with Sikafloor-03 Primer or with Sikafloor-01 Primer (1:1).
   The maximum layer thickness cannot be exceeded when applying in two layers.
   The second layer cannot exceed the layer thickness of the first.
6. Avoid contact with metal, such as water pipes (e.g. by insulating the penetrations of the latter) because galvanised steel pipes in particular are not adequately protected against corrosion.
7. Protect Sikafloor-300 Level leveling layers from high ambient temperatures, direct sunlight and drafts (curing treatment).

Consumption

Approx. 1.5 kg/m²/mm

Packaging

25 kg bag.