Sikadur-42 HE - Fluid sealing mortar - Sika

Sikadur-42 HE is a high performance, moisture resistant, 3-component, epoxy resin based grout.

Currently out of catalog
€541.03Tax Included
SIK 55147
7611237121975

Sikadur-42 HE - Fluid sealing mortar - Sika

Sikadur-42 HE is a high performance 3-component sealing mortar based on epoxy resins , resistant to humidity.

Features

  • High initial strength and fast setting.
  • Also applies at low temperatures.
  • Ready-to-use pre-dosed packaging.
  • Moisture resistant.
  • Without withdrawal.
  • Corrosion and chemical resistant.
  • Stress and impact resistant.
  • High resistance to compression.
  • High vibration resistance.
  • Low coefficient of thermal expansion.
  • Good creep resistance.

Application areas

For heavy-duty sealing and fixing of:

  • Bars.
  • Anchor irons.
  • Fasteners.
  • Tie rods.
  • Security gate posts.
  • Barrier posts, fences.

For the underpinning of:

  • Precise support plate base.
  • Machine bases, support plates for light and heavy machines, including heavy machines with shocks and vibrations, reciprocating engines, compressors, pumps, presses, etc.
  • Bridge abutments.
  • Mechanical fasteners (e.g. roads, bridges, overhead cranes, etc.).

Fixing rails:

  • Rolling tracks.
  • Light rail and rolling track in tunnels.
  • Light rail and running track on bridges.

Application

  1. Mix components A and B in the component A bucket for approximately 30-60 seconds using a mixer attached to a low speed drill (300-450 rpm).
  2. Avoid air entrapment during mixing until material is uniform in color and viscosity.
  3. Place the mixed epoxy into a suitable mixing container.
  4. Gradually add the content of component C (to avoid air entrapment as much as possible) according to the flow requirements (respect the correct mixing ratio) and mix until a uniform and homogeneous mortar is obtained. (for about 3 mins).
  5. Mix only the amount that can be used during the pot life.
  6. Never mix components A and B without adding component C (the exothermic reaction between A and B alone generates excess heat).
  7. Leave the Sikadur-42 HE in the mixing container until the majority of the air bubbles created have disappeared.

Conditioning

Pre-dosed kit (A+B+C) of 24 kg.

Sika
SIK 55147

Data sheet

Signal word
DANGER
WARNING
Hazard statements
H302 + H312 – Nocif en cas d’ingestion ou de contact cutané.
H314 – Causes severe skin burns and eye damage.
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H411 – Toxic to aquatic life with long lasting effects.
H412 – Harmful to aquatic life with long lasting effects.
Hazard pictogram
Hazard pictogram : GHS05 - Corrosive GHS05 - Corrosive
Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
Hazard pictogram : GHS09 - Environmental hazard GHS09 - Environmental hazard
 

Specific References

EAN13
7611237121975

Download

fact sheet-tech-sikadur-42-he

Sikadur-42 HE product data sheet

Download (191.33KB)

record-dry-sikadur-42-he

Sikadur-42 HE product safety record

Download (560.08KB)
There are no reviews for this product yet.