SWS inside standard - Air and vapour tight membrane - Soudal

SWS inside standard - Air and vapour tight membrane - Soudal

• The product is very easy to apply using a flat brush.
• Fills cracks up to 5 mm thanks to the fibers and changes color once dry.

Features :

• Waterproof
• Water vapor resistant
• Self-adhesive tape for adhesion to the window frame (pressure sensitive)
• Flexible
• For indoor use only
• Suitable for plastering and gluing
• Easy installation, easy folding around corners
• Suitable for uneven surfaces
• Tear resistant
• Good temperature resistance.

Applications:

• SWS Inside Standard Tape guarantees an airtight and water vapor tight connection for installation on a window profile.
• This flexible membrane can also be used as an airtight seal of all kinds of wall connections, even on uneven surfaces.
• For indoor use only.

Manual :

1. SWS Inside Standard can only be applied indoors.
   Depending on the situation, SWS Inside Standard can be installed before or after the façade element (eg window frame).
2. SWS Inside Standard can be applied in 2 ways.
3. It is possible to work with a single strip or with 4 separate strips.
   In both cases, additional material must be provided for the corners (approx. 5 to 10 cm per corner).
4. Once the protection is removed from the membrane and the membrane is unrolled, apply it with the adhesive strip (printed side) to the facade element.
5. Both sides of the membrane can be plastered and joined.
6. To attach the film to the structure/masonry, use Soudafoil 360H or 330D.
7. Glue the film, not too tight, on the structural work, in order to compensate for any movements between the different construction elements but avoid bending it.
8. Then press the film evenly with a pressure roller.
9. See the data sheet for more information.

Conditioning :

• 70mm
• 100mm
• 150mm
• 200mm
• 250mm
• 300mm