Décap'Cires Guard Ecological - Wax and adhesive residue remover - Guard Industrie

Décap'Cires Guard Ecological - Wax and adhesive residue remover - Guard Industrie

Eliminates waxes, acrylic emulsions and glue residues on soils.
Ecological Cires Guard Stripper is a powerful and eco-friendly, next-generation stripper designed for stripping acrylic waxes and emulsions used for soils. It also removes traces and residues of glues or foams used for carpets, PVC flooring and linoleum (neoprene, double-sided, polyurethane, vinyl...). Its neutral pH allows you to reapply protection without rinsing and neutralizing, which greatly reduces stripping time.

Ecological Decap'Cires Guard a neutral pH stripper. No soda, no potash and no ethers of ethylene glycol (butylglycol, methyldiglycol...), it does not present the disadvantages of conventional alkaline strippers (classified as corrosive, requiring neutralization and many rinses, dangerous for the user and the environment...).

Benefits:

• Eliminates a wide variety of waxes, emulsions and glues
• Non-corrosive
• Smell-free
• Economic: concentrated
• Don't tamper with media

Use:

• Natural stone, concrete, terracotta, thermoplastics, etc.
• Soil
• Interior

Application:

It is essential to carry out pre-tests in particular to check the suitability of the colours and the strength of the support.

Stripping acrylic waxes and emulsions:

• Dilute the product to 5% or 10% in water depending on the state of the soil or the number of emulsion layers to be removed.
• Apply this solution in abundance on the surface to be stripped.
• Leave on for 5 to 10 minutes.
• Strip with a mono brush with a black disc.
• Aspirate the saturated solution with a water vacuum cleaner.
• Finish with a wet sweep with clear water to remove residue.

Stripping glue residue:

• Remove the flooring in previously cut strips. Use a specially designed blade for this purpose.
• Apply the product to the surface to be stripped with a sprayer.
• Leave on for 10 to 60 minutes without letting the product dry. The action time varies depending on the type of glue, the thickness to be stripped and the temperature.
• Remove residue with a painter's knife or spatula.
• Wait several days before a new coating is put in place.
• For hard-to-remove coatings, take off an angle of about 30 centimetres, pour in the product and let it work for several hours until it takes off.

Application tools:

Apply to Faubert broom.

Consumption:

Consumption depends on the number and quality of diapers to be stripped. The following values are given as an indication:

• Wax stripping: 6 to 20 m2/kg.
• Tapesping glue residues: 4 to 10 m2/kg.