Colour reinforcement - Akemi

Colour reinforcement - Akemi

Long lasting weather resistant product designed for outdoor and indoor use.
Gives a wet effect without shine, particularly suitable for natural and artificial stones, rough and porous.

Features :

• Intensifies the natural color and structure of the stone without shine effect
• Hydrophobic and dirt repellent effect
• No coating on the surface of the stone
• Let the treated stone breathe
• Excellent weather resistance and durability
• No yellowing
• Little smell
• Used correctly, the hardened product is classified as harmless for bonding natural and artificial stone in contact with foodstuffs
• Indoor and outdoor use
• Emission class A+ (confirmed by an external research center)
• Food approved (approved by an external German research center).
• Efficacy reaction (20°C): approx. 24 hours

Use :

1. Cleaning: the surface must be clean, absolutely dry and without any residue.
   Outdoors, it must be ensured that the stone does not contain harmful salts (nitrates, sulphates, chlorides), as these reduce the absorption capacity of the impregnation.
   After cleaning rinse very carefully with clear water.
   Before the protective treatment the stone must be absolutely dry, which requires at best a wait of 1 to 2 days.
   The optimum conditions for an application are a temperature between 15°C and 25°C and protection against rain for 24 hours.
   The surface must not be heated either by underfloor heating or by solar radiation.
2. Apply the product undiluted in a thin layer and evenly with a brush, a wetting broom or a sprayer and allow to penetrate.
3. Completely remove excess product with an absorbent cloth approximately 10 to 15 minutes after application.
4. For absorbent surfaces, apply wet-on-wet several times.
5. It is necessary to ventilate well (approx. 2 to 3 days) during use in the field of food.
6. Tools can be cleaned with AKEMI Thinner Nitro.
7. For routine cleaning, use AKEMI Stone Soap or AKEMI Crystal Clean.

Conditioning :

• 250ml
• 1L
• 5L