Adhesive Remover - Dissolves adhesives and makes sticker removal easier - Lithofin

Adhesive Remover - Dissolves adhesives and makes sticker removal easier - Lithofin

A special product from the Lithofin range, ready to use, designed to effectively remove all types of stickers, labels, adhesive tapes, and glue residue from a wide variety of surfaces (stone, ceramic, glass, plastic, metal, etc.), effortlessly.

Application :

• To remove stickers, labels, adhesive tapes and residue.
• It also removes splashes of rubber, tar, fresh paint, etc.
• Suitable for almost all surfaces made of stone, ceramic, glass, etc.

Benefits :

• Fast and efficient: dissolves adhesives in minimal time
• Versatile: multi-surface, for home and professional use
• Economical: very low consumption for multiple applications
• Safety: non-aggressive formula (but beware of fumes and flammability)
• Environmentally friendly: biodegradable ingredients, recyclable packaging

Instructions for use:

1. Remove as much of the sticker or label as possible by hand.
2. Soak a cloth with the product.
3. Apply to the adhesive residue, leave for a few minutes without letting it dry.
4. Rub with a dry cloth to remove stubborn residue.
5. Repeat the process if necessary.
6. On sensitive surfaces (lacquer, paint), test first in an inconspicuous area

Suitable for removing:

• Stickers, labels, adhesive tapes, and sticky residues.
• Rubber splashes, tar, fresh paint, etc.
• On surfaces such as stone, ceramic, glass, plastic, metal, etc.

Storage

• Keep closed, cool and dry. Do not store above 25°C.
• Shelf life up to 5 years.

Packaging:

• Bottle of 250ml

FAQ - Frequently Asked Questions

1. On what surfaces can I use this paint stripper?
   The product is compatible with most surfaces: glass, ceramic, non-sensitive natural stone, metal, and durable plastics. It is recommended to test the product before application on delicate plastics or painted surfaces.
2. Is it effective on old or very sticky labels?
   Yes, the Lithofin formula is designed to dissolve even old and hardened residues. One or two applications are usually sufficient.
3. Can it be used on natural stone?
   Yes, if it concerns stones that are not sensitive to solvents (granite, basalt, certain reconstituted stones). For polished limestone or marble, perform a localized test.
4. Does the product leave a trace or film after use?
   No, it evaporates cleanly and does not leave a greasy or sticky film.
5. Is it dangerous for the paint?
   On old or fragile paint, it is best to test before use. On fresh paint, it is not recommended to use solvents.
6. How long should it be left to act?
   Between 1 and 5 minutes depending on the adhesive's strength. For very strong adhesives, repeating the process may be necessary.
7. Can it be used indoors?
   Yes, but in a ventilated room, because the product contains solvents.
8. Does the product have a strong odor?
   It gives off a slight solvent odor, which is normal and temporary.