KF Intensive Cleaner - Alkaline cleaner for porcelain stoneware and ceramics - Lithofin

KF Intensive Cleaner - Alkaline cleaner for porcelain stoneware and ceramics - Lithofin

Lithofin KF Intensive Cleaner is a concentrated alkaline solvent-free cleaner containing a balanced mixture of cleaning agents and special additives that dissolve grease and dirt.

It dissolves and removes all kinds of stubborn dirt, layers of oil and grease, debris from the friction of rubber and shoes, layers of polymer and wax, self-polishing emulsions, etc.

Technical specifications:

• Density: approx. 1.1 g/cm3.
• pH: approximately 14 (concentrate).
• Appearance: clear, slightly brownish liquid.
• Scent: slightly lemony.

Scope of application:

Lithofin KF Intensive Cleaner will be used to clean all polished or unglazed porcelain stoneware surfaces.

It is particularly effective for basic cleaning and periodic maintenance of heavily worn ceramic surfaces.

Instructions for use:

1. Use Lithofin KF Intensive Cleaner neat or diluted in water (approximately 1:10), depending on the level of soiling. Apply with a brush or sponge mop and leave for approximately 10 to 20 minutes, scrubbing if necessary.
2. Do not allow the solution to dry out.
3. Then remove with plenty of clean water and wash again with clean water.
4. For large areas: use Lithofin KF Intensive Cleaner in a cleaning machine (vacuum cleaner).
5. Dosage: 0.3 to 0.4 liters per 10 liters of water is sufficient for an area of 100 to 150 m².
6. Ensure the surface is thoroughly wet, as this is the only way to dissolve and remove dirt.

Caution : Do not use on polished marble, anodized aluminum, varnished surfaces, or other alkali-sensitive materials. If in doubt, test on an inconspicuous area.

Tip: For the regular maintenance of lightly or normally soiled surfaces, we recommend Lithofin KF Maintenance Product .

Yield :

• Depending on the level of soiling, 10 to 15 m² if the product remains concentrated and 50 to 100 m² if it is diluted.

Former name: KF Intensive Cleaner - Alkaline cleaner for ceramic maintenance - Lithofin

FAQ - Frequently Asked Questions

1. Is this product suitable for full-body porcelain stoneware?
   Yes, it is perfectly suited to full-body porcelain stoneware, whether matte or structured.
2. Can it be used to remove a cement film?
   No, for cement residue, use a specific acidic cleaner. KF Intensive Cleaner is alkaline and designed for greasy and organic soiling.
3. Is it suitable for an outdoor terrace?
   Yes, it is perfectly suited to porcelain stoneware terraces, especially for removing greasy or atmospheric deposits.
4. Can it be used for regular maintenance?
   No, this is a one-time intensive cleaner. For regular maintenance, use a gentle cleaner specifically designed for porcelain stoneware.
5. Should the product be diluted?
   Yes, the dilution depends on the level of soiling. It can be used undiluted in extreme cases.
6. Does it remove black marks from porcelain stoneware?
   Yes, especially traces of rubber, grease and ingrained deposits.
7. Can it be used in a single-disc machine?
   Yes, it is compatible with mechanical cleaning for optimal efficiency.