Owatrol GLV - Anti-corrosion treatment with a galvanised finish - Owatrol

Owatrol GLV - Anti-corrosion treatment with a galvanised finish - Owatrol

This anti-corrosion treatment makes your materials more resistant, stops rust and protects them from external aggression. Intended for the exposed parts of your boat , it offers you an effective and long-lasting treatment .

Easy to use, it applies directly to healthy rust and adheres to smooth surfaces. It guarantees you a quality result with an opacifying semi-gloss galvanized color rendering.

Properties :

• Direct application to rust.
• Insulating: expels air and humidity, stops rust and stabilizes it without any chemical action.
• Strengthens luminosity and thermal reflection.
• High protection, very opaque.
• Great ease of application.
• Based on MARINE OIL
  • Ideal for marine ambient conditions
  • Very flexible film.
  • Resistant to temperatures up to 175°C.
  • Does not flake.
  • Adheres to all smooth prepared surfaces, new or old, rusty or not.
  • Stretches on its own in just a few moments.

Application :

1. Protect everything that should not be painted, especially if applied with a roller or spray gun.
2. Apply between +5°C and +30°C.
3. Do not dilute.
4. Stir well before and during use to resuspend the pigments.
5. Apply 1 coat of OWATROL-GLV as a finish, or even 2 if necessary.
6. For optimal results: penetration into the support, luminous and regular film which will maintain a certain flexibility over time, wait between 8 and 24 hours between each application (temperature 20°C and 50% RH).
7. If applying by gun and depending on the type of nozzle used, add 5 to 20% of RUSTOLOWATROL to the OWATROL-GLV to bring it to the desired viscosity.
8. As far as possible, and in order to obtain a more uniform appearance, always finish the application in the same direction throughout the surface.
9. OWATROL-GLV is based on RUSTOL-OWATROL ; it therefore dries slowly, do not apply on a very hot surface. Do not apply if there is a risk of rain within 24 hours.

Yield per layer

16-18 m² per liter per coat

Destination :

• Interior Exterior.
• Ferrous and non-ferrous metals, wood, old paints, etc.
• Above the waterline: fittings, masts, balconies, boat trailers, etc.
• Excluding marine: tanks, exhaust pipes.

Conditioning :

0.75 L.