Owalak Marine - Gloss anti-corrosion marine lacquer - Owatrol

Owalak Marine - Gloss anti-corrosion marine lacquer - Owatrol

One -component high-tech modified alkyd enamel .
It guarantees shine and protection of your materials against rust .

Properties :

• Excellent gloss and color retention.
• Anti-corrosion property.
• Contains anti-UV agents
• Adapted to extreme climatic conditions.
• Renovates, protects and decorates dead works.
• Easy application.
• Very good mechanical and chemical resistance.
• Flexible and adherent on all supports.
• Stretched perfect. Easy cleaning.
• Ready to use.
• Yield: 9-10 m² per liter per coat.

Application :

1. Always apply Owalak in thin coats and preferably with a lacquer roller or spray gun.
2. Apply approximately 150 wet microns per coat.
   That is a dry film thickness of about 90 microns per thin layer.
3. Leave to dry between 4 and 8 hours between each coat.
4. Drying times are given for a temperature of approximately 20°C with 50% RH.
   If the atmospheric conditions are lower or higher than these data, this must be taken into consideration in order to adapt the drying and overcoating time.
5. Apply in 2 or even 3 if necessary.

Destination :

• Exterior and interior.
• Supports: metal (aluminum, steel, galva….), wood, old finishes (lacquers, paints), polyester, gelcoat above the waterline.

Conditioning :

1L and 2.5L.