Choukrout - Glassfibre polyester cement - Owatrol

Armed polyester, welding cold with embedded glass fiber PuTTY.

Weight:
3 Items
€12.43Tax Included
€12.81- 3%

Volume discounts

QuantityYou SaveUnit price
35 %€12.17
OWA 0080
3297975900801

Choukrout - Glassfibre polyester cement - Owatrol

Seals and repairs damaged surfaces offering high mechanical resistance .
Very easy to sand , it is the perfect ally for smooth non-porous surfaces.

Its high-performance formula is very resistant to shocks and has excellent adhesion .
Ideal for repair work.

Properties :

  • Two-component polyester putty reinforced with glass fibers to seal holes in supports.
  • Excellent adhesion to most substrates: metal, aluminium, wood, stone, polyester,...
  • Very easy to use – easy sanding.
  • High resistance to water, oil, mineral spirits, diluted acids and alkalis.
  • Can be covered with any type of paint (single or two-component).
  • Very good impact resistance.

Application areas :

  • Car/Mobile home: bodywork pierced by rust, torn sheet metal, large cavity, hole, bump, crack, planing, fairing, casing, tank, radiator, storage battery compartment.
  • Caravan: bodywork repair, waterproofing.
  • Marine: boat hull and deck in wood, metal or polyester, corrosion protection.
  • Building: sealing and cracks in concrete, brick, concrete block, sealing of metal, concrete or polyester tanks, pipes.
  • Agriculture: tank, tub, tank, cistern, water trough, barrel, trough, tractor and agricultural machinery.
  • Central heating: pipes, radiator, boiler, pump, thermal insulation.
  • Plumbing: supply and drain pipes, fitting, siphon, flushing, sink, sink, bathtub.
  • Cover: roof, downspouts, gutter, gutter, frame, vasistas, skylight.
  • Locksmithing: fence grid, door, closure and metal curtain, shutters, wrought iron.
  • Foundry: blowhole, molding defect, lack of material, mould.

Application :

  1. Recommendations before application:
    The support must be clean, dry, not oxidized, dusted and degreased. First remove any remaining corrosion and old finish. The support should be as rough as possible.
  2. Product preparation:
    Add 2% hardener to the mastic to obtain a grip in 10 minutes. In cold weather, increase the dose of hardener while in hot weather reduce it. The quantity of hardener will regulate the setting time without any effect on the final hardening. Example of average proportion: A coffee bean of hardener for a knob of Choukrout mastic.
  3. Application :
    Mix the Choukrout putty and the hardener. Once the mixture has been made, masticate the parts to be filled using a spatula. Apply a coat necessary for the repair. Hardening is uniform without shrinkage. One application is enough. After curing, can be machine sanded.
  4. After application:
    Clean tools immediately after use. Be careful not to incorporate the rest of the mastic/hardener mixture into the pot of pure mastic.

destinations:

  • Indoor / outdoor – Horizontal / vertical
  • Adheres to ferrous and non-ferrous metals (aluminium, copper, lead, etc.), wood, concrete, stone, marble, fiber cement, sandstone, mosaic, PVC, polyester, ABS, etc.

Conditioning :

300g and 600g.

Owatrol
OWA 0080
3 Items

Data sheet

Signal word
WARNING
Hazard statements
H226 – Flammable liquid and vapour
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H361 – Suspected of damaging fertility or the unborn child.
H373 – May cause damage to organs.
Hazard pictogram
Hazard pictogram : GHS02 - Flammable GHS02 - Flammable
Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
Hazard pictogram : GHS08 - Health hazard GHS08 - Health hazard
 

Specific References

EAN13
3297975900801

You might also like

Customers who bought this product also bought: