Deks Olje D1 - Saturating wood oil for tropical woods - Owatrol

Deks Olje D1 - Saturating wood oil for tropical woods - Owatrol

D1 is a saturator for exotic woods based on alkyd resins and natural oils .
Easy to use, it is applied with a brush or a roller and dries in 24/48 hours.

Its excellent penetration guarantees you a quality result and easy maintenance .
Perfectly adapted to dense and difficult to impregnate woods .
Ideal to sublimate your terraces , garden furniture or boats with a touch of elegance.

Properties :

• Suitable for dense, greasy, hard-to-impregnate wood.
• Excellent penetration of substrates.
• Not film forming.
  Must be in the wood and not on the surface of the wood.
• Oiled finish.
• Easy to use.
  Easy maintenance.
• The practical performance varies according to the type, the surface condition, the absorption of the support as well as the mode of application.
  8 to 12 m²/l per coat.
  About 1 to 4 m²/l in a multicoat system.
• Finish: Matte with oiled look.

Applications:

1. Do not dilute.
2. Apply a coat of D.1. at saturation.
3. Let the product penetrate 15-30 minutes.
4. Repeat the operation until the substrate is saturated (wood refuses).
5. Do not let dry between coats (apply “wet on wet”).
6. Once the wood is well saturated, always brush or wipe off the excess product to avoid any traces of shine when drying.

Note : the oiled appearance of D.1. during application gradually disappears over the following weeks and according to sun exposure. When the wood takes on a light gray hue, move on to maintenance.

Destination :

• Exterior: garden furniture, terraces, gratings, boat decks, dead works on boats, gates, etc.
• Exotic woods: Teak, Mahogany, Movingui, Ipé…
• Can be applied above or even below the waterline; leads to excellent insulation and the creation of a clinging base before classic underwater treatment.
• Horizontal - vertical.

Conditioning :

0.3L, 1L, 2.5L, 20L and 200L.