Seasonite - Colorless Stabilizer for New, Damp Wood - Owatrol

Seasonite - Colorless Stabilizer for New, Damp Wood - Owatrol

Seasonite protects new wood from the damaging effects of sun and moisture during the first year it is exposed to atmospheric agents .

An immediate application of Seasonite protects the wood against sun damage , thus keeping it looking new for longer.
Being breathable, it allows excess water to regulate itself while preventing moisture from penetrating the wood.
With Seasonite , new wood is naturally exposed without being subjected to the constraints of weathering during the first year.

Properties :

• Preserves the natural appearance and stabilizes new wood.
• Minimizes bursting, swelling, deformation and cracking due to permanent exposure to sun and rain.
• Easy to apply - in just one coat.
• Colorless.
• Ready to use.
• Practical performance varies depending on the type, condition and absorption of the surface, as well as the method of application.
  +/- 5 to 7 m2 per litre.

Application :

1. Prepare the surface as described in "Substrate Preparation".
2. The wood must be clean and dry to the touch.
3. Apply a generous coat to all surfaces of the wood.
4. Thoroughly soak the ends.
5. For a grating, work Seasonite into the gaps between the boards.
6. After a minimum of six months of exposure, wood treated with Seasonite is ready to be protected with a saturator such as Textrol Pro or a colored finish such as Solid Color Stain.
7. Use Net-Trol to clean the wood and restore its original color.

Note : For wood that has already been exposed to the elements for several months, use Net-Trol.

Tips for proper application:

• Surfaces must be clean, dry to the touch, free from dust, grease, mold and all other surface soiling.
• Cover everything that should not be treated, including plants and shrubs.
• Apply between +10°C and +30°C. Do not apply in direct sunlight or on hot surfaces.
• Do not apply if cold and/or wet weather is expected within 24 hours.
• Mix the product thoroughly before application.
  Do not dilute.
• The vertical cladding will be treated from top to bottom.
• After application with a spray gun, always spread the product with a brush or roller to improve penetration and uniformity.

Destinations:

• Only for new exterior softwoods (less than six months of exposure) during the first few months of exposure.
• Ideal for pressure-treated wood.
• Horizontal and vertical surfaces: gratings, cladding, shingles, palisades and other exterior wooden supports.

Packaging:

1 L, 2.5 L and 15 L.

FAQ - Frequently Asked Questions

1. Why use Seasonite on new wood?
   Because new wood is very unstable, it absorbs too much or too little water, warps, cracks, or turns gray quickly. Seasonite stabilizes this critical period.
2. Can Seasonite be applied to wood that is already grey?
   No, it's designed for new wood. If the wood has started to turn grey, you should first use a wood brightener.
3. Is the product truly colorless?
   Yes, it does not change the appearance of the wood and does not add any tint.
4. Can a finishing coat be applied immediately after Seasonite?
   No, Seasonite is a temporary treatment. The finish (oil, saturator, paint, etc.) must be applied 6 to 12 months later.
5. Is it compatible with pressure-treated wood?
   Yes, absolutely. It's even recommended because pressure-treated wood is often very damp when installed.
6. Does Seasonite replace a saturator?
   No, Seasonite prepares the wood in the first year. The saturator is then applied for long-lasting protection.
7. How can you tell if the wood is sufficiently stabilized to receive a finish?
   Perform a water drop test. If the water soaks in instead of beading, the wood is ready for a saturator.
8. Can it be used indoors?
   Unnecessary, the interior doesn't expose the wood to the elements. Seasonite is designed for outdoor use.
9. Does the product protect against UV rays?
   It limits the effects of greying, but for lasting UV protection, a saturator will need to be applied after the stabilization period.