MN Autobrillant - Polish for natural stone - Lithofin

MN Autobrillant - Polish for natural stone - Lithofin

Lithofin MN Autobrillant is a water-soluble, solvent-free dispersion based on resistant acrylate and hard wax.

It forms a shiny protective film on the surface, which revives the colors and improves the appearance of the coating. Surface strength is improved.

Technical specifications :

• Density: approx. 1.0g/cm3
• pH: around 8-9 (concentrate)
• Appearance: milky emulsion
• Smell: pleasant freshness
• Solubility in water: very good

Application domain :

This product can only be used indoors to restore the shine of polished marble, granite, natural stone and concrete coverings and to protect them.

To enhance the shine of floors that have become dull and dull.

As a first treatment, to give a silky shine to rough, flamed, honed or damaged surfaces.

Manual :

The surfaces to be treated and the work tools must be clean and dry.

1. As a first treatment, dilute Lithofin MN Autobrillant in water (about 1:5), apply evenly with a clean cloth, sponge or chamois leather and leave to dry for about 30 to 40 minutes.
2. The shine obtained can be enhanced by machine or hand polishing.
3. Absorbent or dull surfaces can be treated with undiluted product.
4. To prolong the action, Lithofin MN Autobrillant can be added from time to time to the washing water (approximately 1 cup per 10 l of water).

Yield :

• 20 m²/litre approximately for vitrification. 200 m²/litre approximately for use in wash water.