WEXA - Alkaline cleaner for all types of dirt - Lithofin

WEXA - Alkaline cleaner for all types of dirt - Lithofin

Lithofin WEXA is an alkaline combined cleaner with a very broad spectrum of action. A combination of special cleaning components with solvents solves multiple cleaning problems.

This product dissolves old layers of wax, yellowed floor care products, sealers , self-shine emulsions , oil and grease stains, soot, rubber and tar stains , paint latex etc.,

Technical specifications :

• Density: approx. 0.95 g/cm³
• pH: 10 (concentrate)
• Flash point: approx. 90°C (cc)
• Appearance: yellow, milky
• Smell: aromatic, lemongrass

Application domain :

This product is intended for deep cleaning of heavily soiled coatings.

In its diluted form, Lithofin WEXA is the ideal product for removing oil and grease: in industry to clean machines, in garages to remove oil stains, in workshops to remove grease, etc.

It can be used on practically all coatings: ceramics, terracotta, concrete slabs, natural stones such as marble, travertine, Comblanchien, granite etc., painted surfaces, plastic materials.

Manual :

1. Apply neat with a brush. Depending on the type of contamination, leave to act for approximately 5 to 20 minutes.
2. In the meantime, brush.
3. After dissolution, add a little water, brush again and rinse with plenty of water.
4. In the case of persistent fouling, repeat the operation. For light soiling, Lithofin WEXA can be diluted up to 1:20 with water.

Attention: surfaces sensitive to solvents such as rubber, PVC and other plastics, freshly painted surfaces and the like, can be attacked.

If in doubt, a test should be carried out first.

Yield :

• About 5-7 m²/litre for concentrated use, about 50-100 m²/L for diluted use.