Vlekstop Plus - Impregnation with color reinforcement - Lithofin

Vlekstop Plus - Impregnation with color reinforcement - Lithofin

Lithofin Vlekstop Plus = Lithofin Fleckstop Plus

Ready-to-use special product for ceramic, natural and artificial stone surfaces.

Lithofin Vlekstop PLUS contains superior treatment agents, oil and water repellents based on siloxane, dissolved in solvents. Special additives intensify the colors for a lasting effect.

It penetrates the surface and reduces the capillary absorption capacity of the materials, so that water, oils and greases cannot be absorbed.

The staining agents remain on the surface and can be wiped off before they penetrate. Durability depends on the surface and the amount of product absorbed.

The color and structure of the material are significantly enhanced.

Technical specifications:

• Density: approx. 0.82 g/cm³
• Flash point: >38°C (cC)
• Appearance: liquid, colorless
• Scent: aromatic

Scope of application:

To facilitate maintenance and prevent staining while simultaneously intensifying the colors of absorbent surfaces made of ceramic, terracotta, natural or artificial stone. Particularly suitable for natural stones with low to medium absorption, rough (flamed, sandblasted, aged, etc.), honed, or polished. Suitable for granite, gneiss, quartzite, schist, or limestone.

Note: Non-absorbent surfaces cannot be treated. The sensitivity of limestone and marble to acids is retained.

Yield :

It depends on the absorption capacity of the substrate. Reference values: polished granite: approx. 10-15 m²/litre, flamed or raw granite: approx. 6-8 m²/litre.

FAQ - Frequently Asked Questions

1. Does the product change the appearance of the stone?
   Yes, Vlekstop Plus enhances the natural color of the stone and gives it a slightly wet look. It is advisable to test it first on an inconspicuous area.
2. Can it be used outdoors?
   Yes, the product is perfectly suited for outdoor use and is resistant to weathering and UV rays.
3. Is it slippery after application?
   No, Vlekstop Plus does not form a film on the surface and does not increase the risk of slipping when applied correctly.
4. Is it suitable for a bathroom or a kitchen?
   Yes, it is ideal for areas exposed to water, grease and dirt, such as worktops, backsplashes, floors and walls.
5. How often should the treatment be repeated?
   Durability varies depending on use, but on average 3 to 5 years. High-traffic areas may require more frequent maintenance.
6. Can Vlekstop Plus be applied to a stone that has already been treated?
   Only if the old treatment is completely removed. Prior stripping may be necessary.
7. Is the product compatible with underfloor heating?
   Yes, provided that the heating is switched off during application and during the drying time.