Polytrol - Colour restorer - Owatrol

Polytrol - Colour restorer - Owatrol

Color restorer for plastics , stone , metal , cement , tiles ,…

It offers you high protection and revives the colors of your materials .
Its high-performance formula without silicone acts in depth and guarantees you a quality result.

Ideal for your renovation work on your car , motorcycle or plastic garden furniture.

Properties :

• Restores shine and protects polished or chromed metals: aluminium, chrome, brass, bronze...
• Revives the color and appearance of tarnished plastics and gelcoats (car bumpers, boat hulls, garden furniture, shutters).
• Regenerates marbles, tiles, tombstones, slates, terracotta, slabs whose color has changed over time.
• Restores shine to paints and varnishes that have suffered from bad weather.
• Does not contain silicone.
• Yield: 18 m²/L.

Recommendations before application:

1. Treat small areas in stages to avoid uncontrolled drying of the Polytrol.
2. Avoid applying Polytrol to hot surfaces or in direct sunlight.
3. Hide the areas that are not to be treated.
4. Before applying Polytrol, always ensure that the surfaces are clean and free of grease and silicone stains, and always dry.
5. If cleaning is necessary, use a solvent or a water + detergent mixture on metal, preferably Net-Trol (same manufacturer) on plastic.
6. Rinse thoroughly with fresh water then leave to dry for at least 12 hours.

Areas of use:

• Home / Floor / Frames: Tiles, floor tiles, marble, slates, aluminum windows, verandas, paints and varnishes, brass, bronze...
• Outdoor / Garden: Garden furniture, shutters, gates, slabs, tombstones, terracotta...
• Motorcycle: Plastics...
• Auto: Chrome, hubcaps, bumpers, dashboards...
• Navy: Boat hull...

Application :

1. Carefully apply a coat of Polytrol with a soft brush.
   Beware of runs (for metal surfaces, sand carefully with very fine steel wool, well soaked in Polytrol).
2. Leave on for 10 to 20 minutes then remove excess product by wiping with a clean, lint-free cloth or paper towel.
3. Do not allow Polytrol to dry before wiping.
4. Allow at least 24 hours to elapse before commissioning.

Conditioning :

0.25L, 0.5L, 1L and 20L.