Akenova rocket 200 - Single component adhesive - Akemi

Akenova rocket 200 - Single component adhesive - Akemi

Fast single-component adhesive based on polyhybrid technology, ready for assembly already after 20 minutes and balances tensions.
For quickly attaching sinks , window sills, stair treads, skirting boards , mirrors , for attaching substructures to kitchen worktops.

For bonding natural and artificial stone (no edge discolouration) such as granite, quartz, sandstone, terrazzo and the like with mineral, metal or wooden surfaces (e.g. surface bonding of natural stone slabs or tiling).
For interior and exterior , for vertical and horizontal bonding.

Features :

Akenova rocket 200 is a one-component, moisture-curing, tension-balancing adhesive based on polyhybrid technology.
The product is characterized by the following properties:

• Fast mounting resistance
• High initial tack
• Vertical and horizontal collages
• Extremely high joint strength
• Low water absorption
• Very good water resistance, underwater bonding
• Elastic adhesive seal
• No discoloration of the edges of the natural stone, because without plasticizer or solvent
• Good maneuverability
• Good smoothing ability
• Virtually odorless
• VOC free
• Silicone-free
• Isocyanate and tin free
• Temperature resistant from -25°C to +80°C
• UV, moisture and weather resistant
• Suitable for indoors and outdoors
• Can be painted
• Bond strength > 7.0 N/mm²

Area of use :

Akenova rocket 200 is an innovative adhesive which is very well suited for tension-balancing and non-polishing bonding of natural and artificial stone such as granite, quartz, sandstone, terrazzo and the like to mineral, metal or wooden surfaces ( for example surface bonding of natural stone slabs or tiles).

Due to the low water absorption, underwater bonding is also possible.

1. The adhesive facilitates the bonding of large components in particular due to its high initial strength (e.g. mounting mirrors).
2. After curing, the product shows very good adhesion to silicate surfaces (eg granite, concrete, glass).
3. On non-silicate substrates, an application of primer may possibly be necessary, in particular for bonding subject to humidity (see the primary table).

Conditioning :

290ml cartridge