Akenova elastic 100 - Single component adhesive - Akemi

Akenova elastic 100 - Single component adhesive - Akemi

One-component elastic adhesive based on polyhybrid technology, low shrinkage and tension balance.
For gluing anchor rods in solid construction elements (eg fountains, monuments).

For bonding natural and artificial stone (no edge discolouration) such as granite, quartz, sandstone, terrazzo and the like with mineral , metal or wooden surfaces (e.g. surface bonding of natural stone slabs or tiling).
Also suitable for indoor and outdoor sealing , for vertical and horizontal bonding.

Features :

Akenova elastic 100 is a one-component, moisture-curing, tension-balancing adhesive based on polyhybrid technology.
The product is characterized by the following properties:

• High initial tack
• Vertical and horizontal collages
• High assembly strength
• Elastic adhesive seal
• No discoloration of the edges of the natural stone, because without plasticizer or solvent
• Good maneuverability
• Good smoothing ability
• Virtually odorless
• VOC free
• Silicone-free
• Isocyanate and tin free
• Temperature resistant from -25°C to +80°C
• UV, moisture and weather resistant
• Suitable for indoors and outdoors
• Can be painted
• Bond strength > 4 N/mm²

Area of use :

Akenova elastic 100 is an innovative adhesive which is very well suited for tension-balancing and non-polishing bonding of natural and artificial stone such as granite, quartz, sandstone, terrazzo and the like to mineral, metal or wooden surfaces ( for example surface bonding of natural stone slabs or tiles).

1. The adhesive facilitates the bonding of large components in particular due to its high initial strength (e.g. mounting mirrors).
2. After curing, the product shows very good adhesion to silicate surfaces (eg granite, concrete, glass).
3. On non-silicate substrates, an application of primer may possibly be necessary, in particular for bonding subject to humidity (see the primary table).

Conditioning :

290ml cartridge