Sika AnchorFix-1 - Anchor sealing adhesive - Sika

Sika AnchorFix-1 - Anchor sealing adhesive - Sika

2-component polyester anchoring adhesive based on methacrylate, free of solvent and styrene.

Application areas

As a fast curing sealant for all types of:

• Armatures,
• Threaded rods,
• Bolts and special anchoring systems.

In the following mediums:

• hard natural stone,
• massive rock,
• Concrete,
• Solid or hollow masonry.

Characteristic

• Fast hardening
• Use with standard gun
• Use at low temperatures
• High load capacity
• ETA available for grouting in non-cracked concrete
• ETA available for sealing in solid or hollow masonry
• No creep, even on the ceiling
• Styrene free
• Little smell
• Little waste

Application

1. Unscrew and remove the cap.
2. Cut the plastic.
3. Screw on the static mixer.
4. Insert the cartridge into the gun and start applying.
5. When work is interrupted, the static mixer may remain on the cartridge after pressure on the gun has been released.
   If, when resuming work, the resin has hardened in the tip, a new tip should be used.

Aspect

• Component A: white
• Component B: black
• Component A+B: light gray

Conditioning

300ml cartridge