Sika FastFix-134 TP - Paver Bed Mortar - Sika

Sika FastFix-134 TP - Paver Bed Mortar - Sika

Sika FastFix-134 TP is a cementitious , single-component, ready-to-use mortar used as a laying bed for concrete and stone pavers for traffic or pedestrian areas.
It can be used for local reprofiling of concrete traffic lanes.

Features

• Quick setting
• Excellent adhesion on concrete and natural stone pavers, and cementitious materials
• Good resistance to freeze/thaw cycles and de-icing salts
• High mechanical properties
• High impact resistance
• Good resistance to hydrocarbons

Application areas

Mortar for bedding concrete and stone pavers for trafficable or non-trafficable areas and for local reprofiling of concrete traffic lanes.

• Lanes
• Pedestrian zones
• Parking lots and driveways
• Streets
• Garden paths and landscaping

Application

1. Sika FastFix-134 TP can be mixed with a low speed electric stirrer (~ 300 rpm).
2. Pour the recommended water into a suitable mixing container.
3. While stirring slowly, add the powder to the water and mix well for at least 3 minutes until a homogeneous mixture is obtained.
4. In the case of a laying bed, pour the Sika FastFix-134 TP on the support and spread it with a trowel.
5. Then, place the pre-moistened pavers by pressing them lightly into the laying bed.
6. Observe a minimum of 24 hours before grouting with Sika FastFix-133 TP.
   A qualified engineer should be responsible for the design of expansion joints.

Consumption

25 kg of powder makes it possible to produce a volume of approximately 12 liters of mortar

Conditioning

25 kg bag