Stop-Leaks - Watertight clogging below ground level - Aquaplan

Stop-Leaks - Watertight clogging below ground level - Aquaplan

Sealant that dries quickly as it swells. Immediately seals any leak , even under extremely high pressure.

During the short drying time, the product expands and thus immediately and permanently seals all leaks through cracks, holes and crevices.

Also suitable for corners and joints between underground walls and floor slab under water pressure as well as for very strong anchoring of bolts, pipes and metal parts in brickwork and concrete.

Does not contain solvent. Non-flammable.

Benefits :

• Quickly provides a permanent seal, due to its “expanding” expansion on drying
• Instantly stops all active leaks, even under high pressure
• Seals leaks and joints, allows anchoring
• Seals leaks in corners between the wall and the floor of underground constructions and secures bolts or other objects

Application :

For sealing cracks, joints, crevices and holes in concrete and masonry such as basements, ponds, sewers, swimming pools and foundations.

Useful information:

• Do not apply when the ambient temperature or the temperature of the substrate is below +5°C. Also respect this temperature during drying (about 8 hours).
• Avoid too intense or too rapid drying: ensure that STOP-FUITES remains moist for at least 15 minutes. during drying.
• A low water temperature slows down the action of STOP-FUITES, a high temperature accelerates it.
• Clean the tools as soon as you have finished the work.

Prepare the substrate:

1. Expose cracks, holes and seams with a chisel. Form a cutout at least 2 cm wide and deep.
2. Remove all particles and dirt with clear water.

Conditioning :

• 1 and 2.5 kg
• Gray