Sika Igolflex-301 - Elastomeric liquid membrane EC 1 PLUS - Sika

Sika Igolflex-301 - Elastomeric liquid membrane EC 1 PLUS - Sika

Sika Igolflex-301 is a single-component, elastomeric , water-based, liquid-applied bituminous coating used for waterproofing horizontal and vertical surfaces.
EC 1 PLUS label: very low VOC emissions .

Features

• Without joints or welding
• Fully adherent system that prevents lateral migration of water under the membrane
• EC 1 PLUS label: very low VOC emissions
• High crack bridging capacity
• Great elongation
• High adhesion to concrete
• Temporarily resistant to UV rays
• Ready to use and easy to use
• Can be applied by projection

Areas of application

Waterproofing

• Waterproofing and damp-proofing of underground and above-ground concrete building structures for protection against water infiltration
• Waterproofing under finishing coats such as under tiles in wet areas and swimming pools

Coating

• Protection of concrete against aggressive atmospheric gases (CO2 and SO2)
• Local repairs and finishing of details on slate bituminous membranes

Application

1. Any dust, friable or loose material must be completely removed from surfaces before application of the product and associated products, preferably by industrial vacuum cleaner.
2. To confirm adequate surface preparation and good adhesion of Sika Igolflex-301, perform a small test before starting the full application, with -if necessary- an adhesion test.
3. Apply Sika Igolflex-301 to the prepared substrate (with or without reinforcement), using the appropriate application tools and with the required consumption.

Consumption

~1.5 kg/m² (wet layer ~1.0 mm / dry layer ~0.8 mm).

Two-layer waterproofing:
Maximum thickness per layer: 2.0 mm (dry layer).

Packaging

• 10 kg cans.
• 20 kg cans.