COTTO Pre-Wax - Pre-impregnation of terracotta floors - Lithofin

This product is a pre-impregnation for extra protection against oil and grease stains for terracotta floors.

It is to be applied before the final treatment with Lithofin Cotto Wax-Finish .

Packaging:
12 Items
€35.07Tax Included
€35.79- 2%

Volume discounts

QuantityYou SaveUnit price
23 %€34.72
34 %€34.36
55 %€34.00
1010 %€32.21
LIT 140-11-B
4001524014012

COTTO Pre-Wax - Pre-impregnation of terracotta floors - Lithofin

This ready-to-use water-based impregnator contains special polymers and additives to waterproof against water and oil.

Lithofin Cotto Pre-Wax penetrates the porous surface and forms an ultra-thin and invisible film in the capillaries.

Its powerful action prevents the penetration of water, dirt and grease.

In addition, the removal of dirt is considerably facilitated.

The reduction in water vapor diffusion of Lithofin Cotto Pre-Wax is minimal.

It is resistant to ultraviolet rays and does not yellow. The modification of the surface appearance is nil or negligible.

Technical specifications :

  • Density: 1.0g/cm³
  • pH: ca.4.5
  • Appearance: clear, colorless
  • Odor: almost none

Application domain :

Easy to maintain stain protection primer for Italian, Spanish, French terracotta cladding, clay tiles, stove earthenware, etc. especially in very dirty areas like kitchens and dining rooms.

Always apply before the final Lithofin Cotto Wax-Finish treatment.

Note: Do not apply to factory pre-treated, waxed or salt-varnished surfaces. If in doubt, do a test first.

Manual :

  1. Spread a copious and regular quantity of Lithofin Cotto Pre-Wax on the clean, stain-free and dried coating with a mop or sponge.
  2. You can also spread this product regularly with a garden sprayer and spread it immediately with a sponge.
  3. On very absorbent surfaces, a second coat should be applied after 30-40 minutes. Puddles or “drops” should be avoided or wiped up immediately.
  4. Do not use a fluffy cloth to remove product remains that are drying on the surface.

Caution: always treat the entire surface of a room. During treatment, the surface may appear slightly stained; however this will disappear after drying. Wipe off spills on wood, glass, PVC, varnished surfaces, permanent elastic seals, etc. with a cloth.

Yield :

  • Approx. 5 to 10 m²/litre on soft clay tiles, Spanish and French terracotta.
  • Approx. 10 to 15 m²/l on Florentine and Italian terracotta.
Lithofin
LIT 140-11-B
12 Items

Data sheet

Signal word
As of Q2 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard statements
As of Q2 2023, no hazard statements are listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard pictogram

Specific References

EAN13
4001524014012

You might also like

Customers who bought this product also bought: