Sikadur-52 injection - Epoxy injection resin - Sika

Sikadur-52 injection - Epoxy injection resin - Sika

Sikadur-52 Injection Normal is a 2-component, low viscosity, epoxy resin -based injection product with a normal pot life, and specially formulated to be injected into cracks , either by pressure injection, or by gravity.
This "Normal" version (normal pot life) is for use on supports that have a temperature of +5°C to +30°C.

Features

• Injection temperature range between +5°C and +30°C
• Good adhesion to concrete, masonry, stone, steel and wood supports
• Suitable for dry and slightly damp conditions
• Maximum crack width 5.0 mm
• Good mechanical properties
• Two versions for different climatic conditions
• High mechanical and adhesion resistance
• Hard but not brittle
• Low viscosity
• Injectable by pumps for single-component products

Application domain

Sikadur-52 Injection Normal can only be used by experienced professionals.

• Injection resin for cracks
• Fills and seals voids and cracks in structures such as bridges, civil engineering constructions, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and retaining structures waters.
• Structural bonding
• Prevents the penetration of water and the infiltration of substances that promote corrosion of the reinforcement

Application

1. After inserting or gluing the injectors, cover the crack with a sealant and let it harden.
2. Then fill the crack with resin until the resin flows clean and free of contamination.
3. Add all of component B to component A.
4. Mix using an electric mixer at low speed (max. 250 rpm) for at least 3 minutes.
5. Avoid overmixing to minimize air entrainment.
6. Only mix complete kits.

Consumption

1 kg of Sikadur-52 Injection Normal: ~0.93 liter of injection resin

Conditioning

4 kg.