Sanitary silicone - pre-coloured - Akemi

Sanitary silicone - pre-coloured - Akemi

One-component sealant for joints hardening with moist air, based on silicone rubber , very elastic and cross-linking with acetate.
Especially for expansion and connection joints in the kitchen and sanitary area for tiles, glass ceramics, enamel, glass, painted wood and plastics.

Not suitable for natural and artificial stones!

Features :

• Adheres well to many types of surfaces
• Has excellent working and smoothing properties
• Effectively tolerates expansion/contraction up to 25%.
• Forms skin in 10-15 minutes
• Stable at temperatures between -40°C and +150°C
• Is extremely weather resistant
• Exhibits high resistance to abrasion, tearing and notching
• Can be delivered in any color
• Can be stored for 24 months in a cool, dry place

Use :

1. Contact surfaces must be dry, clean and free of grease and dust; tiles, ceramics, glass, clinker, enamel can be cleaned with cleaner A; Cleaner I should be used on plastic and enamel surfaces.
2. In order to avoid adhesion on the three sides and in case of deeper joints, AKEMI joint cement must be used. deeper joints, AKEMI joint cords should be used; closed-cell polyethylene (PE) gaskets should be used, for damp rooms (bathrooms, saunas, etc.), for outdoors and areas exposed to permanent moisture, otherwise polyurethane gasket beads ( PUR) with open cells.
   Joint size: 3 x 5 mm minimum.
3. The areas surrounding the joint must be protected with special AKEMI adhesive tape.
4. In humid rooms and areas exposed to permanent humidity, outdoors and on particular surfaces (see the table of primers), we recommend the application of our primers on the sides of the joints.
5. Working temperature -5°C - +40°C. 6.
   After application, the silicone should be smoothed out within 10-15 minutes.
   The best results are obtained with the smoothing agent AKEMI.
6. The hardening process, which depends on the thickness of the layer, the temperature and the atmospheric humidity relative to the air, takes about 1-3 mm per 24 hours.
7. Tools can be cleaned with AKEMI Nettoyant A.

Conditioning :

• 310mL cartridge
• 400 mL pouch