SikaFloor-2540 W - Two-component epoxy coating in RAL colors CUSTOMIZED - Sika
Sikafloor-2540 W is a 2-component water-based colored coating based on epoxy resin, AgBB approved.
Available in ALL RAL colors upon request to YOUR DESIGN.
Delivery times: +/- 3 weeks.
10 pieces minimum per manufacturing bath, then purchase in multiples of 5 pieces.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
10 | 5 % | €479.22 |
20 | 10 % | €454.00 |
30 | 15 % | €428.78 |
SikaFloor-2540 W - Two-component epoxy coating in RAL colors CUSTOMIZED - Sika
Sikafloor-2540 W is a 2-component water-based colored coating based on epoxy resin , AgBB approved.
Available in ALL RAL colors upon request to YOUR DESIGN.
Delivery times: +/- 3 weeks.
10 pieces minimum per manufacturing bath, then purchase in multiples of 5 pieces.
Features
- Low VOC and AMC emissions
- Low particle emissions
- Good chemical and mechanical resistance
- Permeable to water vapor
- Dilution with water
- Low odor
- Ease of application
Application areas
- Colored epoxy coating for concrete, cement screeds, sprinkled systems and epoxy mortars.
- Suitable for normal to medium mechanical and chemical stress.
- For production areas, stores, parking lot floors, garages, etc.
Application
- Before application, confirm the moisture content of the substrate, relative air humidity and dew point.
- If the water content is above 6%, Sikafloor EpoCem can be applied as a temporary moisture barrier (TMB).
Primer
- Ensure that a continuous, pore-free layer covers the substrate.
- If necessary, apply two coats of primer.
- When used as a primer, always apply with a brush.
Seal coat
- Sikafloor-2540 W is distributed evenly using a short nap roller.
- A seamless finish can be achieved if a "wet" edge is maintained during application.
- Uneven application of the material and resulting differences in the thicknesses of the coating layer can cause differences in surface "gloss".
Appearance
- Resin - component A: liquid, colored
- Hardener - component B: liquid, transparent
Consumption
~ 0.2-0.3 kg/m² applied as a coating applied by roller.
These values are theoretical and do not take into account a certain number of elements which could increase them such as porosity, roughness, unevenness, losses, etc.
Conditioning
18 kg A+B kit in light gray or flint gray.
Examples of the RAL color chart:
- Shades of yellow:
- Shades of orange:
- Shades of red:
- Shades of pink and purple
- Shades of blue:
- Shades of green:
- Shades of gray:
- Shades of brown:
- Shades of white and black:
Data sheet
- Signal word
- DANGER
WARNING - Hazard statements
- H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H318 – Causes serious eye damage.
H319 – Causes serious eye irritation.
H411 – Toxic to aquatic life with long lasting effects. - Hazard pictogram
-
GHS05 - CorrosiveGHS07 - HarmfulGHS09 - Environmental hazard
Specific References