Anti-stain Nano with beading effect - Akemi
Strong impregnation product protects floors , tables and worktops in natural stone and artificial stone , indoors and outdoors.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
20 | 7 % | £14.57 |
Anti-stain Nano with beading effect - Akemi
Strong impregnating product to prevent the penetration of water , grease or oil .
Protects floors , tables and worktops in natural stone and artificial stone (marble, Solnhofen stone, sandstone, earthenware), indoors and outdoors.
Begins to act a few minutes after its application and reaches its full effectiveness after 2 or 3 hours.
Contains special substances that prevent the spreading of liquid drops.
Features :
- Very fast protection
- Pronounced beading effect
- No or only slight color darkening
- A very good repellent effect against oils and fats
- Very low water and dirt absorption under the influence of humidity
- Rapid moisture removal during dry periods
- A very strong decrease in paint adhesion on treated surfaces, with an anti-graffiti effect
- Retaining the ability to breathe stone, no film on the surface
- Does not stick while curing
- Does not turn yellow
- UV stability
- No release of methanol during curing
- Emission class A+ (confirmed by an external research center)
- Food approved (approved by an external German research center)
- Efficacy reaction (20°C): 10-20 minutes
- Yield: approx. 5 to 20 m²/litre depending on the absorbency and the nature of the surface.
Use :
- Shake well before use.
The optimal conditions for impregnation are: the driest stone possible, a temperature between 10 and 30°C as well as protection against rain for 2 to 3 hours.
During processing, the coating should not be heated by direct sunlight or underfloor heating. - Cracks larger than 0.3mm should be closed before treatment, anti-stain.
- In general, 1 to 2 applications without waiting for the drying of the first pass are sufficient.
On a weakly absorbent surface, dilution with AKEMI Nitro Thinner is recommended. - Apply the product with a wet brush or broom.
On facades, a vacuum sprayer can be used with low pressure (max 1 bar) and a distance from the nozzle of 5 to 10 cm (precaution to be taken: check the resistance and tightness of the pipe to solvents).
The anti-stain is thus applied until it runs over 40 to 50 cm. - About 20 minutes after application, before the water repellent dries on the surface, the excess that is not absorbed must be wiped off with a cloth so that no product remains on the surface.
To avoid veils on the polished surfaces, they must be repolished (we use either a pad, a very soft cloth, or a sheepskin). - In case of reduced effectiveness or irregular application, you can easily repeat an application.
The effect vis-à-vis water and oil appears after a few minutes and the total effectiveness is reached after 2 to 3 hours. - It is necessary to ventilate well (approx. 2 - 3 days) when used in the food sector.
- The cleaning of work tools can be carried out with AKEMI Nitro Thinner.
Conditioning :
- 250ml
- 1L
- 5L
Data sheet
- Signal word
- DANGER
- Hazard statements
- H226 – Flammable liquid and vapour
H304 – May be fatal if swallowed and enters airways.
H413 – May cause long lasting harmful effects to aquatic life. - Hazard pictogram
-
GHS02 - FlammableGHS08 - Health hazard
Specific References
- EAN13
- 4004208119317
Bonjour suite à ma livraison je voudrais vous soumettre un détail: Le scoth qui est poser en suplement sur le bouchon (ce qui est bien pour le transport ) .De mon avis il faudrais éviter de l'apposer sur les cotés des étiquettes ou sont inscrite les instructions (mode d'emploi ...) parce que Lors de l'arrachage du scotch une partie de l'étique devient illisible... Ou mettre un scotch moins agréssif sur l'étiquette pappier ??? Si on peut aider... *Livraison parfaite produit bien à bientôt pour d'autres commandes* Bien Cordialement
Super efficace
j'utilise ce produit depuis des années sur le marbre Livraison parfaite
excellent produit je m'en sert sur mon plan de travail en granit, et sur mon sol en marbre