PRO Abra-CLEAN - Special alkaline cleaner with abrasive nanoparticles - Lithofin

PRO Abra-CLEAN - Special alkaline cleaner with abrasive nanoparticles - Lithofin

Low-alkaline cleaner comprising ultra-powerful cleaning substances with abrasive nanoparticles.

The “gel” consistency ensures ease of application. It is odorless and does not cause unpleasant or harmful fumes.

Lithofin Abra-CLEAN dissolves and removes hardened and stubborn dirt, grease, oils, wax layers, encrustations, etc.

Technical specifications :

• Density: approx. 1.3g/cm³
• pH: approx. 10
• Appearance: viscous-opaque, beige
• Smell: fragrant

Application domain :

For removing stubborn and old dirt, for deep cleaning tiles, porcelain stoneware and natural stone slabs such as granite and other similar hard stones.

Indoor and outdoor use.

Very effective for removing the transport protection film from tiles (porcelain stoneware).

Lithofin Abra-CLEAN can be added to other (acid-free) cleaners to boost their effectiveness. Apply the chosen cleaner, add approximately 20-50% Lithofin Abra-CLEAN and mix with a brush. It is imperative to rinse thoroughly.

Manual :

1. Thoroughly clean the surface with a broom or vacuum cleaner as sand and other small solid dirt may scratch the surface.
2. Wet slightly beforehand with water.
3. Shake the can, apply the product directly and spread over the surface.
4. Leave to act for about 10 minutes and brush the surface with a push broom or a single brush until all the dirt is dissolved.
5. Remove or vacuum product residues and rinse (several times) with clear water.
6. Clean work tools with water. Do not allow cleaner to dry.

Please note: a matte area may appear on sanded limestone, marble, varnished surfaces and other sensitive surfaces. It is recommended to always carry out a preliminary test before application.

Yield :

• approx. 5-20 m²/L depending on degree and type of contamination.

Former name: PRO Abra-CLEAN - Special abrasive cleaner - Lithofin